TOTALTRACKTIME A-B

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REC REMAIN kbps

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

kHz-dB

00

 

 

40

 

 

20

 

 

12

6

2

 

 

0

 

over

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AM

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PM

 

INT

 

 

 

 

 

 

 

 

 

S.SKIP

 

 

 

-dB

TRACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MARK

 

 

 

 

 

 

 

 

 

 

 

LINE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1819 20 21 22 23 24 25 26

18.MIC / INT MIC label

The MIC label appears when external micro- phones are selected.

The INT MIC label appears when input se- lected for recording is the internal micro- phone.

19.LINE label

The LINE label appears when input(s) se- lected for recording is (are) the LINE IN jacks.

20.Record

The Record symbol appears when the PMD671 is in record mode. It appears with the Play symbol when recording. It appears with the pause symbol and flashing when in record pause.

21.Play

The Play symbol appears when the PMD671 is in playback, playback pause, recording or record pause.

22.Pause

The Pause symbol appears when the PMD671 is in playback pause or record pause.

23.Battery

When on battery power, the Battery symbol appears in most displays to indicate battery charge.

indicates that the battery charge is good.

indicates that the battery charge is getting low and there is approximately 5 to 10 minutes of record or playback time available.

flashing indicates that the battery has

approximately 1 to 3 minutes of record or playback time remaining.

The CHARGE indicator light will flash. If BEEP is set to On, the PMD671 will also beep.

If the PMD671 continues to operate, it will automatically shut down. If recording, it will write track information, stop recording and power off. If in playback, it will stop playback and power off.

indicates that the battery charge is de- pleted.

24.S.SKIP label

The S.Skip label appears when Silent Skip is enabled.

25.Margin level

The Margin level is displayed. The PMD671 holds this display at the highest level achieved during the current recording. If more than 0 dB, OV is displayed. To reset the Margin level, press and release the MARGIN RESET button.

26.-dB label

The -dB label applies to the Peak level display.

Care and Maintenance

Use a soft cloth slightly moistened with mild detergent solution.

- 56 -