ENGLISH
HOW TO USE AND SET FEATURES
HOW TO USE THE METER MODE BUTTON (DIGITAL POWER METER)
| METER |
DISPLAY | MODE |
SPEAKERS | BALANCED |
1 | |
SPEAKERS | UN- |
2 | BALANCED |
| POWER ON/OFF |
METER MODE Button
The actual output power can be displayed on the display by detecting the speaker output voltage and output current, and then digitally processing the information.
¶Hold Function
Press the METER MODE button to hold the display of the left and right power output status at the time the button was pressed. When the METER MODE button is pressed again, hold is released. (Hold is also released if a different button is operated.)
Normal display | In Hold | |
|
|
|
¶How to Set Meter Mode
There are two types of display mode for this unit’s digital power meter.
Mode 1: The power display hold time is set to 1 second in this mode. The power output value is displayed every 1 second.
Mode 2: The power display hold time is set to unlimited in this mode. When a larger output than the currently displayed value is output, that output value is displayed on the display.
The setting procedures for mode 1 and mode 2 are shown below.
qPress the METER MODE
button for 3 seconds to 
display the current mode. 
wPress the METER MODE
button once and the newly 
set mode is displayed. 
ePress the METER MODE button for 3 seconds to
complete the setting, and to return to the power display.
BALANCED INPUT/UNBALANCED INPUT GAIN SETTINGS
BALANCED Button
| METER |
DISPLAY | MODE |
SPEAKERS | BALANCED |
1 | |
SPEAKERS | UN- |
2 | BALANCED |
| POWER ON/OFF |
UNBALANCED Button
There are two types of input jack on this unit, BALANCED jack input and UNBALANCED jack input. The input types are independent from each other, and gain settings can be independently set.
The procedure for setting the gain settings is the same for BALANCED input and UNBALANCED input.
The standard gain can be set across a +6dB to
1.Press the BALANCED (UNBALANCED) button for 3 seconds.The display changes from the power display to the gain setting mode, and the current gain value is displayed. In the gain setting mode, the amplifier switches to mute, and no sounds are output.
2.The setting value changes every time the BALANCED (UNBALANCED) button is pressed. Press the BALANCED (UNBALANCED) button until the desired gain value is displayed.
3.When the desired gain value is displayed, press the BALANCED (UNBALANCED) button for 3 seconds to complete the setting.
The set gain value is displayed for 3 seconds, then the display returns to the normal power display. At the same time, muting is released, and sound is output.
18
