BASIC OPERATION
(PLAY BACK)
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must first select the input source on the SR5500.
Example : DVD
POWER
TV | VCR1 | DSS/VCR2 | DVD |
TUNER CD TAPE CDR/MD
| AUX1 | AMP |
|
TV |
|
| MAIN |
VOL. | SLEEP | MUTE | VOL. |
To select DVD, turn the INPUT FUNCTION SELECTOR knob on the front panel or simply press the DVD button on the remote.
After you have selected DVD, simply turn on the DVD player and play the DVD.
•As the input source is changed, the new input name will appear momentarily an OSD information on the video display. The input name will also appear in the display, on the
•As the input is changed, the SR5500 will automatically switch to the digital input, surround mode, attenuation, and night mode s t a t u s w h i c h w e r e e n t e r e d d u r i n g t h e configuration process for that source.
•When an audio source is selected, the last video input used remains routed to the VCR1 & DSS/ VCR2 Outputs and Monitor Output. This permits simultaneous viewing and listening to different sources.
•When a Video source is selected, the video signal for that input will be routed to the Monitor Output jacks and will be viewable on a TV monitor connected to the SR5500.
If a component video input is connected to the DVD or DSS component inputs, it will be routed to the Component Video Output. Make certain that your TV is set to the proper input to view the signal.
VIDEO CONVERT
When this function is activated, the video or
To activate this function, select VIDEO CONVERT in PREFERENCE menu and set ENABLE.
Notes:
•The component video signal is emitted only from component video output terminal.
When the video equipment is connected by component terminal, connect the monitor and SR5500 by the component terminal.
•This function is unavailable for the REC out terminal.
•This function is unavailable for the still picture, fast forward and reverse playing of the video component.
•If, while attempting to use the video convert feature, the SR5500 cannot synchronize with the display device, “NO SIGNAL” appears on the monitor, or noise is generated, this feature cannot be used. All of these signs are caused by equipment incompatibility; there is nothing wrong with the SR5500.
In such case, set VIDEO CONVERT in the PREFERENCE menu to DISABLE. Also, connect the video input signal to the display device via the MONITOR OUT terminal under VIDEO and the
Example:
Monitor is connected with the component.
VIDEO
or | component |
or component
Monitor is connected with the video or
VIDEO | VIDEO |
or | or |
| VIDEO |
component | or |
The signal cannot be converted from the component to the video or
Notes of OSD menu:
•The setup menu can be displayed through all video out (COMPONENT,
•The setting informations (e.g. volume setting) are displayed through all video out when the VIDEO CONVERT function are set ENABLE.
Note:
No setting information is displayed when the signal is emitted from the COMPONENT IN to
COMPONENT OUT.
•The setting informations (e.g. volume setting) are displayed through the
SELECTING THE SURROUND MODE
Example: AUTO SURROUND
| ENTER |
| |
AV SURROUND RECEIVER SR5500 |
|
|
|
SET UP/ | MENU OFF | ||
T.TONE |
|
| |
PURE DIRECT | AUTO |
| DTS |
| 1 | 2 | 3 |
NIGHT | CSII | EX/ES | VIRTUAL |
| 4 | 5 | 6 |
DISPLAY | STEREO | 7.1CH IN | |
| 7 | 8 | 9 |
CLEAR | MEMO | A/D | |
|
| 0 |
|
|
| CHANNEL/SKIP | |
BASS | TREBLE | TUNE/SEARCH | |
To select the surround mode during playback, press the SURROUND MODE button on the front panel or the Surround mode buttons on the remote.
ADJUSTING THE MAIN VOLUME |
| ENGLISH | |||
|
| ||||
| TV | VCR1 | DSS/VCR2 | DVD |
|
SURROUND | TUNER | CD | TAPE | CDR/MD |
|
DIGITAL |
| ||||
AAC |
|
|
|
|
|
|
| AUX1 | AMP |
|
|
| TV |
|
| MAIN |
|
| VOL. | SLEEP | MUTE | VOL. |
|
|
| OSD | MENU |
| |
ENTER
Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOL
/buttons on the remote.
To increase the volume, turn the VOLUME knob clockwise or press VOL button on the remote, to decrease the volume, turn counterclockwise or press VOL button on the remote.
Notes:
•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.
•However, when the channel level is set as described on page 19, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.
(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS &
TREBLE) CONTROL
1 2 3
NIGHT CSII EX/ES VIRTUAL
4 5 6
DISPLAY | STEREO | 7.1CH IN |
7 8 9
CLEAR MEMO A/D
0
CHANNEL/SKIP
BASS TREBLE TUNE/SEARCH
INPUT/DISC+ AUDIO
CH.SEL | LIP.SYNC |
During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.
(Using the remote control unit)
To adjust the bass effect, press BASS or BASS on the remote.
To adjust the treble effect, press TREBLE or TREBLE on the remote.
Note:
•The tone control function can work in the AUTO Surround, Stereo, Dolby PLIIx, DTS,
23
SR5500U DFU_01_ENG 2_2 | Page 23 | 04.8.2, 4:13 PM | Adobe PageMaker 6.5J/PPC |