![Page: 3 / 16](/images/new-backgrounds/18045/180455x1.webp)
RS232C Control Spec | Page: 3 / 16 |
SR9300/8300 | Document Version [2.00] |
|
|
1.Introduction
1-1. Purpose
This document was written in order to clarify specification for control this product by the host controller.
1-2. Scope
This document would be using by software or hardware engineers for production of this product. This product is [marantz SR9300/SR8300/PS9200V2]. (It’s refered to as “This product” after this.)
1-3. Abbreviations
Abbreviation
Description
1-4. References
2.Global Description
2-1. Overview
A Host controller can control or watch out this product as a Slave very easily via the communication cable.
2-2. Block Diagram
HOST
(Controller)
RS232C cable (straight)
SLAVE
(This product)
Connector
Processor Interface | Signal name | Connection device | Connecter | |
- | N.C. | - | 1 | RS232C |
|
|
|
| |
UART | TxD (output) | RS232C Level shift driver | 2 | |
|
|
|
| (9pin,male) |
| RxD (input) |
| 3 | |
|
|
| ||
- | N.C. | - | 4 |
|
- | GND |
| 5 |
|
- | N.C. |
| 6 |
|
GENERAL PORT | CTS (input) | RS232C Level shift driver | 7 |
|
| RTS (output) |
| 8 |
|
- | N.C. | - | 9 |
|