
TroubleshootingInformationSetupConnectionsGetting Started Specications
ENGLISH
Operations Enabled During Playback
During playback of a BD or DVD-Video recorded with several
camera angles, you can change the angle.
Switching the Angle
BD DVD-V
NOTE
Angle·changing·may·be·restricted,·depending·on·the·disc.·
1Press during playback.
The·angle·number·currently·being·played·is·displayed.
Angle
1/3
2Use to select angle.
Angle
2/3
3Press .
The·setup·screen·disappears.
Press .
The·display· brightness· each· time· the· button· is·
pressed.
Normal·· ··Dim·· ··Dark· ··Off

Changing the Brightness of the

Display (Dimmer Control)

Even· when· “Off”· is· selected,· the· status· of· operations· that· are·
performed·appears· momentarily· on· the· display· if· “Display· Setup”·
–·“Temporary·Display”·on·the·GUI·menu·is·set·to·“On”·(vpage·29).
When·you·make·an·HDMI·connection·with·a·TV·or·AV·Amp·compatible·
with·UD8004· and· HDMI· control· functions,· you· can· perform· the·
following·operations·by· setting·the·HDMI· control·function·of· each·
device.·
TV or AV Amp power is turned on by operating
the UD8004, and functions change with UD8004
input.
Turning off the TV’s power turns the UD8004’s
power to standby.
Operating the UD8004 via the TV’s remote
control.
(When the TV’s remote control has player operation buttons)
n
n
n
If·the·HDMI· control·function·does· not·operate·properly,· check·the·
following·points.·
Is·the·TV·or·AV·Amp·compatible·with·the·HDMI·control·function?
Are·the·HDMI· control·function·settings· of·all·equipment· correct?·
(Step·3)
After·setting,· did· you· add· another· HDMI· device· connection· or·
make·any·changes·in·the·connections?·In·this·case,·perform·setting·
again.·
•
•
•

HDMI Control Function

NOTE
The·HDMI· control· function· controls· operations· of· a· TV· that· is·
compatible·with·the·HDMI·control·function.··Make·sure·that·the·TV·
and·HDMI·are·connected·when·you·perform·HDMI·control.·
Some·functions·may·not·operate· depending·on·the·connected·TV·
or·AV·Amp.·Check· the·owner’s·manual· of·each·device·for· details·
beforehand.
When·“Other· Setup”· –· “Power·Saving”· on· the· GUI· menu· is· set·
to·“Power· Saving· Standby”· or· “Normal· Standby”· (vpage· 30),·
the·player’s· power· cannot· be· turned· on· using· the· HDMI· control·
function.
When·“HDMI·Setup”· –·“HDMI·Control”· –·“Power·Off·Control”· on·
the·GUI·menu·is·set·to·“Off”·(vpage·24),·the·UD8004·is·not·set·to·
standby·even·if·the·connected·device·is·in·the·standby·mode.
•
•
•
•
1Set HDMI control function to “On”.
On·the·GUI·menu,·set·“HDMI·Setup”·–·“HDMI·Control”·(vpage·
24).
2Turn the power on for all the equipment connected by
HDMI cable.
3Set the HDMI control function for all equipment
connected by HDMI cable.
On·the·GUI·menu,·set·the·UD8004·with·“HDMI·Setup”·–·“HDMI·
Control”·(vpage·24).·
Please·refer·to·the·owner’s·manual·as·regards·setting·of·connected·
devices.
Carry· out· Steps· 2· and· 3· should· any· of· the· equipment· be·
unplugged.
b
b
4To ensure that the UD8004’s HDMI video output is
projected on the TV screen, change the input function
of the TV and AV Amp.
5When you turn the TV’s power to standby, check that
the power of the UD8004 and AV Amp also goes on
standby.
Playback HDMI Control Function