Marantz VP-11S2 Picture Adjust

Picture Adjust

Picture quality in each of the picture modes can be adjusted to your liking and those adjustments can be saved in memory.

User 1
Picture Adjust	Gamma	A
Fine Menu 1	Contrast	0
Fine Menu 2	Brightness	0
Input Signal	Color	0
RGB/HD Adjust	Tint	0
HDMI	Sharpness	0
Display	Color Temp.	3
OSD/Blanking	Lamp Mode	Normal
Config.	Iris	1

Item	Adjustments
Gamma	A, B, C, D, E, Theater,
	Standard, Dynamic
Contrast	-50Ô0Ô 50
	(Weak)		(Default)			(Strong)
Brightness	-50Ô0Ô 50
	(Dark)		(Default)			(Bright)
Color	-50Ô0Ô 50
	(Light)		(Default)				(Deep)
Tint	R10Ô 0Ô G10
	(Purple)		(Default)			(Green)
Sharpness	0							50
Color Temp.	1	2 3		4		5 HB
(Color Temperature)	(Red)				(Blue)
Lamp Mode	Normal, Economy
Iris		1		2		3
	Contrast		(High)					(Low)
	Brightness (Low)							(High)
	Sets the lens and illumination
	aperture.

–Gamma setting

To change the type of Gamma curve, set the Picture Mode (☞ p.24) to User (1 – 9). Select “Gamma” from the displayed menu followed by the desired gamma curve (A, B, C, D, E, Theater, Standard or Dynamic).

ABCDE

TheaterDynamic

–Color Temp. (Color Temperature)

1 : Red comes out strong. Color temperature is about 5250 K.

2 : Red is mildly strong. Color temperature is about 5800 K.

3 : Normal. Color temperature is about 6500 K.

4 : Blue is mildly strong. Color temperature is about 7500 K.

5 : Blue comes out strong. Color temperature is about 9300 K.

HB : High Bright : Display brightest image.

NOTES:

-To adjust picture quality, set the index to a mode other than the default. See “Picture Mode”. (☞ P.24)

-The Gamma cannot be set unless User (1 - 9) is set for the Picture Mode (☞ P.24).

-Tint cannot be adjusted for RGB input. For details, see “Functions by Signal.” (☞ P.22-23)

-The settings made in Picture Adjust are saved in the currently selected Picture Mode index.

ENGLISH

25