Maretron IPG100 IPG100 Users Manual , .2 Firmware Revision , .3 Features , .5 Quick Install

IPG100 User’s Manual

The Maretron IPG100 is demands of the marine

.2 Firmware Revision

00 firmware revision 1.0.0.

.3 Features

00 has the following features:

2KServer® software

s you to easily connect to your boat’s er

ories for the IPG100:

.5 Quick Install

G100 involves the following steps. Please refer to the individual

on 2.1) ection 2.2)

.6 Theory of Operation

portion of the N2KView® Vessel Monitoring and control

designed to operate within the harsh

environment. However, no piece of marine electronic equipment can function properly unless

installed, calibrated, and maintained in the correct manner. Please read carefully and follow

these instructions for installation, calibration, and usage of the Maretron IPG100 in order to

ensure optimal performance.

This manual corresponds to IPG1

The Maretron IPG1®

• NMEA 2000 interface AN interface • 10/100 Mbps Ethernet L

• Runs embedded version of Maretron N

• USB port for N2KView Hardware License Key

• Dedicated platform for N2KView clients allow• Supports Maretron Cloud Services, which

network from anywhere with working Internet connection. Contact your Maretron deal

or Maretron directly for information on Maretron Cloud Services capabilities and pricing.

.4 IPG100 Accessories 1

Maretron offers the following access

• PX0852 USB Waterproof Cover

M0 le 16.• PX0837/5 0 Waterproof Ethernet Cab

Installing the Maretron IP

sections for additional details.

1. Unpacking the Box (Secti

2. Choosing a Mounting Location (S

3. Mounting the IPG100 (Section 2.3)

4. Connecting the IPG100 (Section 2.4)

5. Configuring the IPG100 (Section 3)

The IPG100 implements the server

System, providing the same function as the N2KServer component running on a Windows

PC. The IPG100, when connected to an NMEA 2000® network, an Ethernet LAN, and a valid

N2KView® Hardware License Key, takes the information from the NMEA 2000® network and

makes it available to N2KView® clients over the LAN interface. N2KView® platinum clients can

also send switching control messages to the IPG100 over the LAN interface and the IPG100

will relay these messages to the NMEA 2000® network. The next section describes in detail

how the N2KView® system is implemented in terms of networking technology.