®

Installation Instructions

MS-1035, MS-1055-N, MS-1075, MS-1085-N Magnetic Switches

Instructions

Please follow these instructions to connect any of the MS-1035, MS-1055-N, MS-1075, or MS-1085-N to the NMEA 2000 network via a Maretron SIM100 Switch Indicator Module. The wiring diagram appears in Figure 1 below. The diagram shows a connection to channel #1, but connections to other channels are similar.

1.Connect the two alarm contact terminals of the sensor portion of the magnetic switch to a free switch channel. The example in Figure 1 shows the sensor portion of the magnetic switch connected to switch channel 1 with one wire connected to “SW1A”, and the second wire connected to “SW1B”.

2.Use a Maretron DSM250 display (firmware 1.3.5 or higher), the DSM250 viewing function of the Maretron N2KAnalyzer software, or other Maretron display product capable of configuring the SIM100 to set the switch channel mode (indicated as “Channel #x Mode” on the DSM250) for the appropriate channel to “No End of Line Resistor”. For this example, you would set “Channel #1 Mode” to “No End of Line Resistor”.

3.Supply Power to the NMEA 2000 network and verify that the switch channel indicates an “off” (alarm) state using Maretron N2KView software, N2KAnalyzer, or other product capable of displaying switch indicator state.

4.Place the magnetic portion (the part with no connected wires) of the switch close to the sensor portion (the part with connected wires) of the switch and verify that the switch channel indicates an “on” (normal) state during the test.

MS-1035, MS-1055-N,

MS-1075, or MS-1085-N

 

 

 

 

 

 

 

 

 

Sensor

 

 

 

 

 

 

 

 

 

 

Portion

Magnetic

 

 

 

 

 

 

 

 

 

 

Portion

 

 

 

 

 

 

 

 

 

 

SIM100 Screw Terminals

1

2

3

4

5

6

7

8

9

10 11 12

 

SW1A

SW1B

SW2A

SW2B

SW3A

SW3B

SW4A

SW4B

SW5A

SW5B SW6A SW6B

 

Figure 1 - Wiring Diagram

For installation support, please contact:

Maretron, LLP

9014 N. 23rd Ave #10

Phoenix, AZ 85021-7850

Telephone: (+1) 877-550-9100 E-mail: support@maretron.com Web: http://www.maretron.com

Copyright © 2008 Maretron, LLP All Rights Reserved

P/N: M001805 Rev.1.1 9/08

Page 1
Image 1
Maretron MS-1085-N, MS-1075 installation instructions Installation Instructions, Maretron, LLP Rd Ave #10 Phoenix, AZ

MS-1035, MS-1055-N, MS-1085-N, MS-1075 specifications

Maretron, a leader in marine electronics, offers a range of innovative products designed to enhance the efficiency and safety of boating experiences. Among their offerings are the Maretron MS-1075, MS-1085-N, MS-1055-N, and MS-1035, each distinguished by cutting-edge features and technologies tailored for diverse marine needs.

The Maretron MS-1075 is a multifaceted display system equipped with advanced data management capabilities. It features a high-resolution color screen that provides clear visibility under various lighting conditions. One of its standout functionalities is the ability to integrate with Maretron's NMEA 2000 network, enabling users to monitor multiple data sources, such as engine parameters, tank levels, and navigation data, all in real-time. Its user-friendly interface allows for easy customization of data displays, making it a preferred choice for both seasoned mariners and novice boaters.

The MS-1085-N takes this functionality further with enhanced connectivity and compatibility. This model supports both wired and wireless connections, offering greater flexibility in installation. The MS-1085-N is specifically designed to withstand harsh marine environments, featuring waterproof housing and UV-resistant screens. This resilience ensures that vital data is accessible even during inclement weather, promoting safer navigation and informed decision-making.

Next is the Maretron MS-1055-N, which focuses on fuel efficiency and management. With built-in sensors, this model can accurately measure fuel consumption, providing real-time feedback that can help boaters optimize their cruising performance. The MS-1055-N also supports alarm functionalities, alerting users to any unusual fuel consumption patterns which may indicate potential issues. This model is an indispensable tool for those looking to maximize their vessel’s efficiency.

Finally, the Maretron MS-1035 integrates advanced environmental sensing technologies. It features sensors that monitor atmospheric conditions, including temperature, humidity, and atmospheric pressure. This information is crucial for adapting to changing weather conditions, enhancing safety during voyages. The MS-1035 seamlessly connects to other Maretron devices, creating a comprehensive monitoring system that ensures boaters are informed about their surrounding environment.

Overall, Maretron's range of products, including the MS-1075, MS-1085-N, MS-1055-N, and MS-1035, showcases the brand's commitment to innovation, reliability, and user-friendly design. Each model is equipped with unique features that cater to the diverse needs of boaters, setting a benchmark in marine electronics for enhanced safety and performance on the water.