1-7
Nº51 Media Player Getting Started
In this configuration, multichannel audio is output using the
“6 Channel Analog Output” connectors. Select Analog Audio
Preferences : 5.1 CH to configure multichannel audio preferences.
SSP Mode Using Analog Audio Outputs
Set the Volume Control : Volume parameter to “Variable” to
directly control the signal level to the power amplifier using the
Nº51 remote (page3-11).
In this configuration, multichannel audio is output using the
“6 Channel Analog Output” connectors. Select Analog Audio
Preferences : 5.1 CH to configure multichannel audio
preferences.
2-Channel Analog Outputs to Preamplifier
Set the Volume Control : Volume parameter to “Fixed” to
output a fixed line-level signal, and use the Mark Levinson
preamplifier to control the volume level (page 3-11).
Select Analog Audio Preferences : 2-CH to configure the Nº51 to
downmix all multichannel audio sources to 2-channe l analog.
No51 Media Player
Analog Outputs
Mark Levinson Amplifiers
(5) Channels
LR CLSRS
Subwoofer
SUB
Mark Levinson
Preamplifiers*
* Setup in SSP mode. See the applicable Mark Levinson preamplifier
owner’s manual on SSP mode. Contact an authorized Mark Levinson
dealer for assistance.
LR
No51 Media Player
Analog Audio Outputs
Mark Levinson
Preamplifier
LR