Marley Engineered Products 1800, C2500 Operation, Cleaning, Painting, Volts AC 60HZ Watts Amps

OPERATION

1.After the baseboard system has been completely installed, all thermostats should be turned to LOW or NO HEAT. Then turn on breakers. Wait 3 to 5 minutes and check to see that

none of	the	heaters are operating.	If operating, disconnect
power and check wiring. If none are operating then turn ther-
mostats to highest position and wait 3 to 5 minutes. Check
to see that		all heater(s) are	operating. Should any not be
operating,	dis	connect power and check wiring.

2.Allow entire system to operate steadily for 1/2 hour. This should remove oily residue from manufacturing. (Some smoking may occur).

3.Select the setting for comfort on all thermostats.

CLEANING

Because of the convection heating principle which depends on air circulation through the finned element, dust will collect between the fins. The heater should be cleaned regularly for maximum efficiency. Before cleaning be sure the heater is off and the ele- ment is cool. A vacuum cleaner with a brush attachment may be used for cleaning. The finish of the heater may be cleaned with a slightly damp rag if desired.

PAINTING

Painting of this baseboard is not necessary unless to match room decor. To paint, first rough up the exterior with steel wool. Paint only the exterior of the cabinet. Do not allow paint on the element and high limit capillary tube. Use a high quality enamel paint.

HOW TO ORDER REPAIR PARTS

In order to obtain any needed repair or replacement parts, warranty service or technical information, please contact Marley Engineered Products Service Center toll- free by calling 1-800-642-HEAT.

When ordering repair parts, always give the informa- tion listed as follows:

1.The Part Number

2.The Model Number

3.The Part Description

4.Date of Manufacture

NAMEPLATE

MODEL NO. C2570WC	DATE CODE 1294
VOLTS AC 60HZ WATTS	AMPS

277/240/208 2500/1900/1450 9.1/8.0/7.0

	54E1 LISTED
	BASEBOARD HEATER
MARLEY ENGINEERED PRODUCTS	PATENT PENDING
BENNETTSVILLE, SC 29512	4104-2109-265

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warrant- ed against defects in workmanship and materials for one year from date

of installation, except heating elements which are warranted against defects in workmanship and materials for ten years from date of instal- lation. This warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive rem- edy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WAR- RANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WAR- RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLI- GENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or con- sequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on the products.

ECR 35194

Part No. 5200-2194-007 3-02

4

SPX Corporation

470 Beauty Spot Rd. East

Bennettsville, SC 29512 USA