MS13 | TM13 | UM7206 |
MS13 (detects motions).
Art nr. EU 09053
TM13 (receives signal from MS13 and puts it on the mains).
Art nr.: G: 09196, U: 09198, I: 09442, F: 09197, CH: 09574
UM7206 (receives signal from the mains and sends it to the SD recorder) Art.nr: EU: 08944, UK: 09572
For more information on the
Insert SD card (not included):
Insert the SD card into the SD recorder, such as illustrated in fig. 7. The SD card will remain sticking out of the SD recorder about 5mm.
Beware:
•The SD MemoryCam2 will function without the SD card too, but then it will not be possible to save the images, in that case images are only displayed Live on the TV or monitor.
•Do not remove the memory card while in recording mode; it may damage the memory card and image data.
3. SETTINGS
You need a TV or monitor for the settings of the SD MemoryCam2.
•Put on your TV and switch it to the video channel.
•Insert the power plug of the SD recorder into the power socket.
•Put the ‘ON/OFF’ switch on ‘ON’.
Setting time and date:
•Press ‘MENU’ button to enter the setup mode.
•Select this icon 
and press ‘OK’ button. Use ‘UP’, ‘DOWN’, ‘RIGHT’ and ‘LEFT’ arrow keys to adjust date and time.
•Confirm by pressing ‘OK’.
The SD MemoryCam2 has an on screen clock which will print the date and time on recorded images when movement is detected. During the reading of images on a PC, the date and time shall not be displayed but rather a part of the file name. Every day has a new folder.
Note: The programmed time and date can only keep 12 hours when Mains is off i.e. when the power adapter is unplugged.
Setting motion detection ‘ON/OFF’:
•Press ‘MENU’ button to enter setup mode.
•Select this 
or this 
icon and press ‘OK’ button to switch motion detection ‘ON’ or ‘OFF’.
When ‘motion detection’ is ‘ON’, the system will enter
