ELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS: *Be sure electricity is turned off at the main power box before wiring
1.Four wires are connected to the fan. Black – this is the “hot” power to run fan.
White – this is the “common” power to run fan and light. Blue – this is the “hot” power for light kit.
Green – ground wire (on bracket or downrod).
2.If fan and light are to be connected to the same circuit, black and blue wires can both be connected to house circuit black wire.
NOTE: The other end of the blue wire, (light circuit) is in the switch housing with a wire nut and label for light kit attachment. The white wire (common for light kit) is also there.
WARNING: If light kit is not used, DO NOT connect blue wire at the ceiling.
Fan controlled by pull chain on fan.
Light controlled by pull chain on light.
Power lines 120V
BLK
Wiring 
box BLUE BLK
WH
WH
GREEN | DNU ORG | |
GRN |
|
|
|
| |
Ground to mounting bracket
Fan and light controlled by independent wall switches.
BLUE
BLK
WH
WH
Light
Fan
Light switch
Power lines
120V |
|
|
box | BLK | WH |
Wiring |
|
|
|
|
|
GREEN
RG UO DN
| Power lines |
|
Fan controlled by | 120V |
|
pull chain on fan. | Wiring | BLK |
| ||
Light controlled by | box | |
|
| |
wall switch. |
|
|
WH
GREEN
RG UO DN
Fan switch
|
|
|
BLUE | BLK | WH |
|
|
|
Ground to mounting bracket
Fan
Light |
|
Switch |
|
BLUE | BLK |
BLUE |
|
BLK |
|
WH
WH WH
Ground to mounting bracket
Fan
BLUE | WH |
BLK | WH |
Light
Light
9
