INSTALLATION OF REMOVABLE SWITCH HOUSING
NOTE: Be sure the power is off before installing.
1.Loosen the 3 side screws on switch housing hub halfway.
2.If installing light kit, carefully remove light kit plug in bottom of switch housing. Attach light kit to switch housing per instructions supplied with light kit. See “Electrical Connections” for
3.Connect the plug and receptacle and make sure side buckle snaps in place.
4.Attach the switch housing to the switch housing hub. Be sure to align the opening on the edge of switch housing hub with reverse switch.
5.Align the side screws with keyhole slots on edge of switch housing and tighten the side screws.
6.Turn the power on. Your Regency Ceiling Fan is now ready to enjoy!
Switch Housing Hub | Opening for |
|
(bottom of motor) |
| |
| Reverse Switch | Side Screw (x3) |
|
|
Connector (receptacle)
Connector (plug) with Side Buckle
Switch Housing
Keyhole Slot (x3)
Pull Chain
Optional Light Kit
screws into bottomReverse Switch of Switch Housing
11
