Marshall Amplification DRP-1 manual Some Suggested Set-ups

ENGLISH

Some Suggested

Set-ups

●Remember that pedal type effects can be added between the guitar and input of the DRP-1 as you would with a normal guitar amp.

●When recording it is recommended that effects are added at the mix stage as is usually the case when recording a standard guitar amp.

FEATURE GUIDE

FX IN

Stereo input to take the left and right returns from your effects processor (using a stereo jack to 2x mono jack Y lead) when using the DRP-1 as a headphone practice amp only.

FX OUT

Filtered Line Out socket to feed the input of your effects processor when using the DRP-1 as a headphone practice amp and controlled by the Line Out level control.

HEADPHONES

Output for the connection of stereo headphones for private practice sessions.

		MIXER
	I	X
		Filtered Line Out featuring Marshall
M
		emulation for direct connection to either
		P.A. or recording mixers (May also be used
		to drive the input of a normal guitar
		combo).

POWER AMP

Direct pre-amp output to drive a power amp and cabinet set up. Also provides an unfiltered alternative output for direct recording purposes -ideal for recording bright ‘glassy’ clean sounds.

GUITAR

Input jack for the connection from the guitar.

Headphone/ practice amp.

Live sound pre-amp.

Recording emulator or live P.A.

X

I

M

5