1/4” 20 mount
To operate unit, insert the power plug (Marshall V- PS12-500) into the power jack (center pin is +12VDC) located on the side of the monitor. Turn the unit on by pushing the power button in. The unit is turned off by depressing the power button. The unit is equipped with NTSC/PAL auto recognition logic. Simply supply a NTSC or PAL composite video signal to either of the two video BNC connectors labeled ‘IN’. Select the active BNC input by using the selector switch. Adjust the picture by using the control knobs on the top of the unit.
Contrast Tint Color Brightness
Selector Switch
Power On/Off
Power In 12VDC
BNC Inputs and
Outputs
The V-LCD4-PRO-Lis equipped with an active loop- through circuit. This loop-through will only work
when power is supplied to the monitor. The monitor also has a 1/4-20 mount located on the bottom of the unit. This is useful when mounting the monitor on the top of a camera by using a hot shoe mount (Marshall part# V-LCD-MT) or other mounting devices.
Part No. | Display | Input | Color | Picture | Pitch | Controls | Back | Supply | Connectors | Size |
| 4” LCD | 2 NTSC/PAL | Full | 480H x | 0.171W x Power On/Off, | 300 nits | 12 VDC, | Video BNC, | 5.51W x |
V-LCD4-PRO-L Active | Inputs with | Color | 234V | 0.264H | Color,Brightness | 500mA | 5.5mm DC | 3.62”H x |
| Matrix | Loopthrough | Tint, Contrast | | power jack | 1.81”D |
| | | | | | | | | | |
