Marshall electronic V-R151PV-R151P manual TV Mode, Computer

2. TV Mode

1) TV Mode Selection
Press	(INPUT) Using UP, DOWN keys	(TV)

2) Value Default

Press (SYSTEM SETTING) (VALUE DEFAULT System control values will be initialized as this monitor is originally manufactured.

3) Channel ADD / Remove

Press (CHANNEL ADD/ REM) when you select a

channel which has already been added, (ADD/REMOVE) will turn into (REMOVE) to remove the channel from your favorite channel list. To

add the channel, (ADD) and press .

4) Air/ Cable TV
Press			(SYSTEM SETTING)				(TV)
(AIR) or (CABLE)
5)Volume Adjust
Press			(VOLUME ADJUST)		Use UP, DOWN keys
press	(If you press			before pressing			, volume
adjust will become invalid.)
6) Color Change
Press			(COLOR CHANGE)			one of 4 modes
to set you can control				sub-menu with UP, DOWN keys
press		sub-menu (4 color mode) will appear					repeat the
above steps until you have settled color change						press
when you press			, you will be asked whether (SAVE YES) or to
(SAVE NO)			one of the two options.

(If you press menu before selecting (SAVE YES,) color change will become invalid.)

3. Computer

1) Computer Mode Selection

Press (INPUT) using the UP, DOWN keys press (MONITOR) and than press select.

2). Horizontal Pan / Vertical Pan Control

Press (HORIZONTAL PAN ) or (VERTICAL PAN) control (HORIZONTAL PAN) or (VERTICAL PAN) by pressing the UP, DOWN keys.

3) Value Default

Press

(SYSTEM SETTING)

press

(VALUE

DEFAULT)

press

(System control values will be initialized as this

monitor is manufactured.)

4) Color Change

(COLOR CHANGE)

one of 4 modes to set

Press

you can control selected sub-menu with the UP, DOWN keys

press

sub-menu (4 color mode) will appear

repeat the above steps

until you have settled color change

press

when you press menu,

you will be asked whether (SAVE YES) or (SAVE NO)

one of the

two options.

Color Change sub-menu will be limited to Brightness/Contrast only.

(If you press menu before selecting (SAVE YES), color will become invalid.)

5) Input Condition Control
Press	(SYSTEM SETTING)		(INPUT
CONDITION)	one of the five modes to set.
Control the selected sub-menu with Select key
After tuning is settled, use		key to escape from menu tree

Page 6 Page 7