Marshall electronic V-R151PV-R151P manual Installation

3) VIDEO

4) OSD ( On Screen Display) control

Press Menu Select (System Setting) Select OSD U/D) or OSD L/R) use the UP, DOWN keys

5) System Control Menu Tree
	PC	TV	COMPOSITE	S-VHS
HORIZONTAL PAN	0
VERTICAL PAN	0
VALUE DEFAULT	0	0	0	0
CHANNEL ADD / REMOVE		0
TV=AIR CH		0
MODE			0	0
INPUT CONDITION	0
VOLUME ADJUSTMENT		0	0	0
BRIGHTNESS	0	0	0	0
CONTRAST	0	0	0	0
HUE		0	0	0
COLOR		0	0	0

1. Installation

1) Before Installation

nBefore using your monitor, make sure to read this manual carefully. In case of any problems with installation, contact Marshall Electronics.

nThe monitor should be handled with caution and not be exposed to impact or shock.

nThe display area is highly prone to scratches. Use cleaner suggested by the authorized service center.

nDo not expose the monitor in high temperature or in high humidity.

nThere are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not open your monitor case!

2) Components

Rackmountable TFT LCD Monitor- 1 pc

DC Power Supply Adapter -1 pc

Power Cable 1- pc

Computer Cable 1 pc

3) Operation

Multiple Input Terminal

4) Tally

The V-R151P comes with a tally light installed at the top right-hand corner of the unit. The light is operated by inserting a 2.5mm plug into the jack marked ‘TALLY’ on the rear of the unit. The light will come on by closing the two contacts together. DO NOT GIVE POWER TO THIS

PLUG IT IS SELF-POWERED.

5) Mounting

The V-R151P is designed to fit in a EIA standard 19” rack. It requires 6 rack units of vertical space and is secured with eight screws. It may be necessary to center the unit up or down so that it does not touch any adjacent units when the unit is tilted up or down.

Page 10 Page 3