Toshiba PRO A60, SATELLITE A60, A65 - page 193

4.14 Display Mask 4 Replacement Procedures
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual 4-49
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-32.
1. Place the display mask in the correct position and fasten the following 18 latches, in that
order:
- Six top latches
- Five latches on each of the left and right sides
- Four bottom latches
2. Place the display module in the correct position and fasten the following 8 screws, in that
order:
- Two M2.5x7 black flat-head screws on the top
- Four M2.5x7 black flat-head screws on each of the top and bottom of left and right sides
3. Place the display mask in the correct position and fasten the following 8 seals, in that order:
- Four black seals on the bottom
- Four black seals on the top