Toshiba A65, PRO A60, SATELLITE A60 manual Removing the MDC Card, Removing the MDC cover

4.1 General 4 Replacement Procedures

Removing the MDC Card

Remove the MDC Card (Modem Daughter Card) according to the following procedures and Figures 4-6 and 4-7, after checking that the computer is turned off in boot mode.

CAUTION: Remove the MDC card after turning off the computer. If this is violated, the computer or MDC card can be damaged.

1.Turn the computer upside down.

2.Release the M2.5x4 black bind screws.

3.Remove the MDC cover.

CAUTION: Do not touch the connectors on the MDC card or in the computer. Contaminated connectors can cause MDC card failures.

M2.5x4 black bind screw

MDC cover

Figure 4-6 Removing the MDC cover

Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual 4-15