4 Replacement Procedures | 4.1 General |
Tools and Equipment
For the safety of you and other people in the working environment, it is strongly recommended to use electrostatic discharge (ESD) equipment. The proper use of this equipment will ensure successful repair work and reduce the costs for fixing damaged components. The equipment and tools required for disassembling and reassembling are:
?One 2 mm Phillips screwdriver
?One 4 mm
?Torx screwdriver
?Tweezers (for pulling out screws)
?ESD mats (for the floor and work desks)
?An ESD wrist strap or heel grounder
?
?Air ionizers (for highly electrostatic sensitive areas)
?A plastic card (in credit card size)
Screw Tightening Torque
To fasten screws, follow the torque values listed below. Overtightening can damage components and screws. Undertightening can loosen the fastening or make screws come off, which may result in short circuits or other damage.
? M2 (2 mm) | 0.22 N?m (2.2 kgf?cm) |
? M2.5 (2.5 mm) | 0.36 N?m (3.5 kgf?cm) |
? M3 (3 mm) | 0.51 N?m (5.0 kgf?cm) |
? M2.5x4 PSP TITE screws | 0.204 N?m (2.0 kgf?cm) |
? M2.5x6 GIZA TITE screws | 0.36 N?m (3.5 kgf?cm) |
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual |
