4 Replacement Procedures | 4.8 Top Cover |
Installing the Top cover
Install the top cover with the display assembly according to the following procedures and Figures 4- 21,
1.Connect the lid switch flat cables to CN23 on the system board.
2.Place the top cover, adjusting its position.
CAUTION: Use care to avoid that the lid switch cable for lid switch is caught between the top cover and base body.
3.Connect the LED board flat cable to CN17 on the system board.
4.Turn the computer upside down and fix it with the following 25 screws:
-Two M2.5x14 black bind screws
-Twelve M2.5x8 black bind screws
-Eleven M2.5x3 black
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual |
