4.10 Cooling Module | 4 Replacement Procedures |
4.10Cooling Module
CAUTION: When removing the cooling module, keep the following in mind:
1.The cooling module can become very hot during operation. Be sure to let it cool down before starting the repair work.
2.Do not touch or give shock to the fan in the cooling module.
NOTE: The screws for Steps 2 and 3 cannot be removed, only loosened.
Removing the Cooling Module
Remove the cooling module according to the following procedures and Figure
1.Disconnect the cable of the cooling module from CN14 on the system board.
2.Release the one screw next to the fan.
3.Release the four screws on the cooling module using the numbered order shown to the screw.
4.Remove the cooling module.
Cooling module fix screw |
Cooling module |
CN14 |
C P U |
Figure 4-24 Removing the cooling module
Equium A60/ Satellite A60/ Pro A60/ A65 Maintenance Manual |
