Toshiba A65, PRO A60, SATELLITE A60 manual Procedure 4 Test Program Check, HDD error code and status

2.5 2.5-inch HDD 2 Troubleshooting

Procedure 4 Test Program Check

Run the HDD test program stored on the maintenance test program disk for all test items. See Chapter 3 for details on how to use the test program.

If an error is detected during the HDD test, an error code and status will be displayed. The error codes and their status names are listed in Table 2-1. If an error code is not generated and the problem still exists, go to Procedure 5.

Table 2- 1 HDD error code and status

Code Status

1Get Parameter Fail !

2Read Old Data Error

3Write Pattern Error

4Read Back Data

5Error

Data Compare Error

6Restore Data

7Error

Read Verify Error

9 Seek Error

10Disk Controller Self Test Failed

11Disk Controller Test unexpected interrupt Failed

12Disk Controller action Test Failed

13Disk dos not support

SMART

14Disk read attribute threshold error

15Disk read attribute value error

16Disk SMART attribute value error

Equium A60/Satellite A60/ Pro A60/A65 Maintenance Manual 2-13