Marshall electronic V-R171X-IMD-HDSDI operating instructions Specifications, Panel

Specifications

■ PANEL

Screen Size	17” Diagonal
Display Area (h x v)	367.20 x 229.50 mm
Aspect Ratio	16:10 Native (4:3/16:9 Modes)
Pixels	1920 x RGB x 1200
Viewing Angle (h x v)	140° x 120°
Brightness	400 cd/m2
Contrast Ratio	600:1
Dot Pitch (h x v)	0.064 x 0.191 mm
Pixel Pitch (h x v)	0.191 x 0.191 mm

■	VIDEO INPUT/OUTPUT
	HD-SDI Input / Output
	Supports ITU-R BT.656, SMPTE 259M, 292M, 274M
■	CONNECTORS
	HD-SDI Video Input
	1 x BNC Female (75 ￿)
	HD-SDI Video Output (Active Loop-Through)
	1 x BNC Female (75 ￿)
	Power Input

■RS-422/485 SERIAL INTERFACE (RJ12)

Protocols: Image Video, TSL v4.0, MEI

Pin No.	Signal
1	Tx-
2	Ground
3	Rx+ (Receive from host)
4	Rx- (Receive from host)
5	N/C
6	Tx+

■ ELECTRICAL

Power Consumption	5.0A @ 12VDC (60 W)
Voltage Requirement	12 VDC
V-PS12-5V-1 Power Supply:
Input	100V-240V, 2.5A, 50-60Hz
Output	12-17VDC, 5A, 60W Max

■MECHANICAL

2-Pin Twist Lock Connector

Tally Hardware Interface

HD-15 Female

RS-422/485 Interface

2 x RJ12 (Modular 6P6C)

■ TALLY HARDWARE INTERFACE (HD-15)

Activation requires contact closure of pin to ground on the HD-15 connector:

Pin No. Signal

1Green

2Red

3Yellow

4N/C

5Ground

6N/C

7N/C

8N/C

9N/C

10N/C

11N/C

12N/C

13N/C

14N/C

15N/C

26

Dimensions (w x h x d):

Weight (with rack ears):

Operating Temperature Storage Temperature

Compliance

RoHs

18.9” x 10.45” x 1.40”

5.10 lbs

32°F to 120°F (0°C to 50 °C) -4°F to120°F (-20°C to 50°C)

Œ, FCC-Class A, ANSI-63.4 (Certificates on file)

Do not dispose. Return to Manufacturer or Authorized Recycle Facility.