Marshall electronic V-R653-IMD-TE Deinterlacer Submenu, Film Mode, Film Indicator, Motion Display

On-Screen Menu (continued)

DEINTERLACER SUBMENU (continued)

■Film Mode

Film mode uses specialized algorithms to correctly deinterlace content that originated in either 24fps or 25fps. Film Mode is automatically entered whenever a film-to-video cadence is detected in the content. Film cadence detection is active whenever the Deinterlacer Mode is set to Auto.

Use the Film Mode setting to limit the film mode detection to a specific cadence.

•	Auto	Deinterlacer automatically identifies the film cadence
•	2:2 only	Deinterlacer only recognizes content originating in 25fps, and uses 2:2 film mode. 24fps content is ignored.
•	3:2 only	Deinterlacer only recognizes content originating in 24fps, and uses 3:2 film mode. 25fps content is ignored.

■Film Indicator

Use the Film Indicator setting to enable or disable the film mode detection icon. If the Film Indicator is set to On, a green square will appear in the top left corner of the screen whenever a film cadence is detected. The Film Indicator can only be turned on only when the Deinterlacer Mode is set to Auto. It is normal for the Film Indicator to sporadically turn on and off, depending on the content.

■Motion Display

Use the Motion Display options to display inter-field motion as false color (green) on the screen. This feature is used to visualize how the deinterlacer is detecting motion in the content. It is normal for the screen to show large portions of green when viewing moving images.

•	Off	Motion Display is off.
•	Noise	Pixels which change value between fields are displayed as green.
•	Motion	After a noise reduction filter, pixels which change value between fields are displayed as green.

18