Marshall electronic V-R653P-HDSDI warranty Product Overview, Mechanical Specifications, Features

1Product Overview

The Rack mounted and tiltable V-R653P-HDrepresents a technological revolution in LCD imaging for broadcast and profes- sional video applications. The V-R653P-HD features three state of the art, High Resolution, 1.2 TFT-megapixel™ screens with completely digital signal processing. All SMPTE/ITU serial digital video standards and signal types are accepted and displayed on each screen of this model. All video formats are scaled to fi t on screen in the highest resolution using a state of the art LSI that incorporates 4x4 pixel interpolations with precision Gamma correction to produce the best images available. Each screen is calibrated to SMPTE standards for Gamma and color temperature.

4Mechanical Specifications

Dimensions	19.12”W x 5.14”H x 2.5”D (48.6cm x 130.5cm x 63.5cm)
V-R72P-2HD Weight	6.0 lbs
Power Consumption	12VDC/36 watts. – (5.5 Amps max - UL Class 2 supply included)

2	Features
•	3 High Resolution 6.5-inch 1.2 MegaPixel wide screens
•	100% digital processing
• High resolution scaling of all images
• Wide viewing radius - 130° horizontal and 120° vertical provides
	superior visibility when the viewer is not directly in front of the screen
• 500 candelas per square meter (cd/m2) luminance produces
	enhanced image quality in varying light and viewing conditions
• 500:1 ratio of contrast between black and white luminance
	values with response rates less than 30 ms results
	in excellent quality for moving images
•	4:3 and 16:9 screen aspect ratios for DTV applications in SD formats
• Works with all SMPTE/ITU SDI/HDSDI production formats and frame rates
• Blue Gun for color adjustment

3 RU 5.14” 13.5 cm

5Operational Setup

1.Unpack the V-R653P-HDSDI and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606.

2.After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required when installed to prevent possible damage to the V-R653P-HDSDI internal components.

3.Connect required cables for signal input and output. Please note that power must be applied to the V-R653P-HDSDI for all outputs to be activated. All BNC connectors should be rated for 75Ω.

4.Plug the V-PS12-5V-1 power supply into the A.C. source

5.Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.

6.Turn on the V-R653P-HDSDI by depressing the power switch located on the front of the unit.

• SD/HD digital signal indicators

• Small Footprint – occupies only 3RU of a standard EIA 19 inch rack

• Ready to mount – all brackets are factory installed

• Lightweight - Save over 30 pounds when compared to similar CRT models

• All adjustments and selections are readily available. No menus!

• Easy to use front panel selection of inputs

• NTSC or Pal operation with automatic signal format detection

• All inputs automatically terminate

• Includes V-PS12-5V-1 Universal power supply (U.L. class 2)

• Unique front mount with tilt adjustment

• Dry erase label for each screen

V-PS12-5V-1

Universal power supply (U.L. class 2)

6Connectors

*HDSDI/SDI inputs comply to SMPTE259M / ITU-R BT601

*All Outputs Require Power to be applied for activation

Monitor 3	Monitor 2
HDSDI/SDI	HDSDI/SDI
Input	Input

	Tally IN
	DB-15 Female
	Pin1-M3Grn	Pin9-Gnd
	Pin2-M3Red	Pin10-Gnd
	Pin3-M3Yel	Pin11-M1Grn
	Pin4-Gnd	Pin12-M1Red
	Pin5-Gnd	Pin13-M1Yel
Monitor 1	Pin6-M2Grn	Pin14-Gnd
HDSDI/SDI	Pin7-M2Red	Pin15-Gnd
Input
	Pin8-M2Yel

3Electrical Specifications

Number of Screens	3
Display (Viewing Area)	6.5” Diagonal (16.4cm), (5.67”H x 3.08”V) (144.0mm x 78.24mm)
Viewing Angles	130°H x 120° V
Resolution (Dots)	800H x RGB x 480V (1.2 million pixels)
Dot Pitch	0.06 mm (W) x 0.163mm (H)
Contrast Ratio	500:1
Pixel Response	<30ms
Brightness (in cd/m²)	500 cd/m²
System	NTSC/PAL auto recognition for standard definition signals
Inputs per display	HDSDI/SDI with re-clocked output (BNC)

Active Output	Active Output	Active Output	12 VDC from
Re-Clocked	Re-Clocked	Re-Clocked	V-PS12-5V-1
and	and	and	power supply
Re-Shaped	Re-Shaped	Re-Shaped	Left Pin - Pos
			Right Pin- Neg

2 V-R653P-HDSDI Users Guide Marshall Electronics 3