Miller Electric Big Blue 400 PX manual Weld And Power Specifications, Engine Specifications

SECTION 4 − SPECIFICATIONS

4-1. Weld And Power Specifications

	Weld Output	Weld Output	Rated Welding	Rated Welding	Maximum
Welding	Range At	Range At			Open-	Generator Power
			Output At 60 Hz	Output At 50 Hz
Mode	60 Hz	50 Hz			Circuit	Rating
			(1800 rpm)	(1500 rpm)
	(1800 rpm)	(1500 rpm)			Voltage
	20 − 410 A	20 − 300 A	300 A, 32 Volts DC	300 A, 32 Volts DC		Single-Phase,
						9 kVA/kW, 82/41 A,
CC/DC			60% Duty Cycle	30% Duty Cycle
						110/220 V AC,
			250 A, 30 Volts DC	250 A, 30 Volts DC
						50 Hz
			100% Duty cycle	100% Duty cycle	73
CV/DC			300 A, 29 Volts DC	300 A, 29 Volts DC		110/55 V AC Receptacles
	14 − 40 V	14 − 40 V	60% Duty Cycle	40% Duty Cycle
Flux Core						7 kVA/kW
			250 A, 26.5 Volts DC	250 A, 26.5 Volts DC
			100% Duty cycle	100% Duty cycle

4-2. Engine Specifications

Engine	Fuel
	Capacity
Perkins 403.15 Water−Cooled Three−Cylinder 21.7 HP Diesel Engine	11.5 gal (43.5 L)

4-3. Dimensions, Weights, And Operating Angles

	Dimensions
	32 in (813 mm)
Height	35-3/4 in (908 mm)				G
	(to top of lift eye)
	26-1/4 in (667 mm)
Width	(mtg. brackets turned in)					! Do not exceed tilt angles or engine
	28-3/4 in (730 mm)
							could be damaged or unit could tip.
	(mtg. brackets turned out)					! Do not move or operate unit where it
Depth	56 in (1422 mm)
							could tip.
A	56 in (1422 mm)
B	54 in (1372 mm)	A	B
				C
C	52 in in (1321 mm)
D	2 in (51 mm)
E	26 in (660 mm)
F	7/8 in (22 mm)						30°
G	27-3/4 in (705 mm)						30°
	9/16 in (14 mm) Dia.				H	20°
H
	4 Holes				Front Panel End	20°
	Weight			D		F
No fuel: 1100 lb (499 kg)
					E
w/ fuel: 1199 lb (544 kg)
Lifting Eye Weight Rating:
1500 lb (680 kg) Maximum
							OM-223 037 Page 15