SECTION 7 − OPERATING AUXILIARY EQUIPMENT
7-1. 110 Volt Receptacles
5
3
67
8
4
2 | 1 |
222 975
1110 V 32 A AC Receptacle RC11
2110 V 16A AC Receptacle RC12
3110 V 16 A AC Receptacle RC13
Receptacles supply 50 Hz
Maximum output from RC11 is 3.5 kVA/kW. Maximum output from RC12 or RC13 is 1.8 kVA/kW.
Maximum combined output of all recep- tacles is 7 kVA/kW.
4Supplementary Protector CB5
5Supplementary Protector CB6
Supplementary protector CB5 protects re- ceptacle RC12 from overload. CB6 pro- tects RC13 from overload. If a supplemen- tary protector opens, the receptacle does not work. Place supplementary protector switch in the On position to reset breaker.
6Earth Leakage Circuit Breaker ELCB 1
7Earth Leakage Circuit Breaker ELCB2
8Circuit Breaker Test Button
ELCB1 protects RC12 and RC13 from Earth leakage fault. ELCB2 protects RC11 from overload and Earth leakage fault. If ei-
ther circuit breaker opens the correspond- ing receptacle does not work. Place circuit breaker switch in the On position to reset breaker.
.At least once a month, run engine at weld/power speed and press test but- tons to verify ELCB1 and ELCB2 are working properly.
.If a circuit protector continues to open,
contact Factory Authorized Service Agent.
.Generator power decreases as weld output increases.
