6-3. Process/Contactor Switch
1 Process/Contactor Switch
1 | ! |
|
Weld output terminals are ener- gized when Process/Contactor switch is in a Weld Terminals Al- ways On position and the engine is running.
Use switch to select weld process and weld output on/off control (see table be- low).
Place switch in Remote On/Off Switch Required positions to turn weld output on and off with a device connected to the Remote 14 receptacle.
Place switch in Weld Terminals Always On positions for weld output to be on whenever the engine is running.
|
|
| Ref 804 068 / Ref 222 875 |
|
|
|
|
|
|
|
|
| Process/Contactor Switch Settings |
| |
|
|
|
|
Switch Setting | Process |
| Output On/Off Control |
|
|
|
|
Remote On/Off Switch Required −TIG | GTAW With HF Unit, Pulsing Device, Or Remote |
| At Remote 14 Receptacle |
Control |
| ||
|
|
| |
|
|
|
|
Remote On/Off Switch | Stick (SMAW) With Remote On/Off |
| At Remote 14 Receptacle |
Required − Stick |
| ||
|
|
| |
|
|
|
|
Remote On/Off Switch | MIG (GMAW) |
|
|
Required − CV Feeder |
| At Remote 14 Receptacle | |
w/Constant Speed Feeder |
| ||
Using Remote |
|
| |
|
|
| |
|
|
|
|
Weld Terminals Always On − Wire | MIG (GMAW) |
| Electrode Hot |
w/Voltage Sensing Feeder |
| ||
|
|
| |
|
|
|
|
Weld Terminals Always On − Stick | Stick (SMAW), |
| Electrode Hot |
Air Carbon Arc |
| ||
|
|
| |
|
|
|
|
Weld Terminals Always On − TIG | GTAW With HF Unit, Pulsing Device, Or Remote |
| Electrode Hot |
Control |
| ||
|
|
| |
|
|
|
|
