Miller Electric Big Blue 400 PX manual Activating The Dry Charge Battery If Applicable

5-4. Activating The Dry Charge Battery (If Applicable)

	! Always wear a face shield,
	rubber gloves and protective
	clothing when working on a
3	battery.

	Remove battery from unit.
	5	Vent Caps
2	6	Sulfuric Acid Electrolyte
		(1.265 Specific Gravity)
1	7	Well

Fill each cell with electrolyte to bottom of well (maximum).

! Do not overfill battery cells.

Wait ten minutes and check electro- lyte level. If necessary, add electro- lyte to raise to proper level. Reins- tall vent caps.

8 Battery Charger

! Read and follow all instruc- tions supplied with battery charger.

4

5 A For 30 Minutes

OR+

−

Tools Needed: 30 A For 12 Minutes

Charge battery for 12 minutes at 30 amperes or 30 minutes at 5 am- peres. Disconnect charging cables and install battery.

.When electrolyte is low, add

only distilled water to cells to maintain proper level.

drybatt1 6/05 − S-0886

5-5. Connecting The Battery

. Close door after connecting battery.

. The engine will not run if engine access door is open.

! Connect Negative (−) Cable Last.

+

−

Tools Needed:

1/2 in Ref. 804 009 / Ref. 222 875 / S-0756-C

OM-223 037 Page 23