Marshall electronic V-R65P-HD Electrical Specifications, Mechanical Specification, LCD4-MT

V-R65P-HD shown with side mount configuration of V-R65-BA adaptor

and IDX-E50S battery installed

IDX-E50S

V-R65-BA

V-R65P-HD shown with V-LCD4-MT camera hot shoe mount attached plus rear mount

configuration of V-R65-BA adaptor and IDX-E50S battery

IDX-E50S

V-R65-BA

V-LCD4-MT

V-R65P-HD shown with V-H700P hood attached plus side mount configuration of

V-R65-BA adaptor and IDX-E50S battery

5Electrical Specifications

Display (Viewing Area)	6.5” (5.67”H × 3.10”V) (144.0mm x 78.24mm)
Viewing Angles	130°H x 120°V
Resolution (RGB Dots)	800H x RGBx480V (1.2 million pixels)
Contrast Ratio	400:1
Dot Pitch	0.163 mm
Pixel Response	<25ms
Brightness	400 cd/m²
System	NTSC/PAL auto recognition for composite video
	Composite with loop (BNC)
Inputs	HDSDI/SDI with re-clocked output (BNC)
	Multiple Analog Format HD-15

6Mechanical Specification

Dimensions	7.25”W x 4.25”H x 2.5”D
Approx. Weight	3 lbs
Power Consumption	12VDC, 5.0 Amps max - UL Class 2 (supply included)
Display Viewing Area	6.5” (5.67”H x 3.10”V) (144.0mm x 78.24mm)

7Faceplate Cleaning

When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are too coarse and will scratch the surface of the Plexiglas faceplate. Paper towels may also leave streaks on the surface.

Antistatic and fingerprint resistant Plexiglas cleaning agents are recommended.

V-R65P-HDUsers Guide Marshall Electronics