Marshall electronic V-R84DP-2C warranty Electrical Specifications, Mechanical Specification

5Electrical Specifications

Display (Viewing Area)	8.4 Inch diagonal (170.4mm w x 127.8mm h)
Screen Aspect	4:3/16:9 switchable
Viewing Angles	160° with protective screen and treatment (130°H x 120°V native)
Contrast Ratio	500:1
Dot Pitch	.213mm square pixel
Pixel Response	10ms rise/25ms fall
Backlight Type / Life	Field Replaceable CCFL (50,000 hour half life)
Brightness	500 cd/m²
LCD Screen Treatments	Anti Reflection, Anti Glare, Hardcoat
Protective Screen	0.118” (3mm) thick Optical Grade Polycarbonate with Anti-Glare and Anti-Abrasion
	coatings. (600 Cheesecloth mil-M-13508C)
Estimated MTBF	5 years of 24/7/365 operation
System	NTSC/PAL auto recognition
Inputs	2 Analog Composite (BNC) Self Terminating
Active Outputs	2 Composite Video (BNC) Available when power is applied to monitor
Color temperature	D65 (6500° Kelvin)
Color Gamut	SMPTE-C
Luma Linearity	Typical +/- 3% with 5 ire increments (0 to 10 ire)
Power Required	10.4 to 16.8 VDC
Power Consumption	Approx. 15 watt nominal
Operating Temperature	32°F to 120°F (0°c to 50°c)
Storage Temperature	-4°F to 120°F (-20°c to 50°c)
Compliance	￿, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHS WEEE/Environmental	Do not dispose. Return to Manufacturer or Authorized Recycle Facility

6Mechanical Specification

Dimensions	9”w x 6.875” h x 2.5” d (228.6mm x 174.6mm x 38.1mm)
Approx. Weight	3.3 lbs
Power Consumption	14-10 VDC, 15 Watt nominal
	(Universal Voltage 5.0Amps max - UL Class 2 supply included)

7Faceplate Cleaning

Faceplate Cleaning

When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro fi ber cloth. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the Polycarbonate faceplate. Paper towels may also leave streaks on the surface. Antistatic and fi ngerprint resistant cleaning agents are recommended. Wash protective cover with a solution of mild soap or detergent and lukewarm water. Use a clean soft cloth, applying only light pres- sure. Rinse with clean water and dry by blotting with a damp cloth or chamois. Grease, oil or tar may be removed with a good grade of hexane, aliphatic naphtha, or kerosene. These solvents may be obtained at a paint or hardware store and should be used in ac- cordance with manufacturer’s recommendations.

DO NOT USE: window cleaning sprays, kitchen scouring compounds or solvents such as acetone, gasoline, benzene, alcohol, carbon tetrachloride, or lacquer thinner. These can scratch the sheet’s surface and/or weaken the sheet causing small surface cracks called “crazing.”

Faceplate Dusting

Dust with a soft, damp cloth or chamois. Dry or gritty cloths may cause surface scratches and create a static electric charge on the surface. Neutralizing static electricity effects by using recommended cleaning and polishing practice.

Faceplate Polishing

Protect and maintain surface gloss by occasional polishing with a good plastic cleaner and polish. Apply a thin, even coat with a soft clean cloth and polish lightly with cotton fl annel. Then wipe with a damp cloth to help eliminate electrostatic charges that can attract dust particles

Marking on the Faceplate

Use SHARPEE or equivalent marker. Clean as per instructions with an ammonia free cleaning agent.

4 V-R84DP-2C Users Guide