Marshall electronic V-RD151PV warranty Installation, Composite Video / S-VHS, Menu Tree, Computer

1Installation

1)Before Installation

• Before using your monitor, make sure to read this manual carefully.

In case of any problems with installation, contact Marshall Electronics.

•The monitor should be handled with caution and not be exposed to impact or shock.

•The display area is highly prone to scratches. Use cleaner suggested by the authorized service center.

•Do not expose the monitor in high temperature or in high humidity.

•There are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not open your monitor case!

2) Components

Rackmountable TFT LCD Monitor- 1 pc

DC Power Supply Adapter -1 pc

Power Cable 1- pc

Computer Cable 1- pc

3) Operation

Multiple Input Terminal

3Composite Video / S-VHS

1)Composite Video / S-VHS Selection By Remote Control

Press Video or S-VHS on remote control directly.

By Menu key

Press Menu Select (INPUT) using the UP, DOWN keys press Select (COMPOSITE) or (S-VHS) and than press Select

2)Value Default

Press Menu Select (MODE) press Select Select (NTSC) or (PAL) depends on manufactured country Video Mode will not work on (TV) and (Monitor)

3) Volume Adjust

Press Menu Select (VOLUME ADJUST) use the UP, DOWN keys press Select (If you press menu before pressing select, volume adjust will become invalid)

4) Color Change

Press Menu Select (COLOR CHANGE) Select one of 4 modes to set you can control selected sub-menu with the UP, DOWN keys press Select sub-menu (4 color mode will appear repeat the above steps until you have settled color change press Menu when you press Menu, you will be asked whether (SAVE YES) or (SAVE NO) Select one of the two options. (If you press menu before selecting (SAVE, YES) color change will become invalid.)

MONITOR

S-VHS

CAMCORDER / Composite Video / DVD

POWER SUPPLY

4) Mounting

The V-RD151P is designed to fit in a EIA standard 19” rack. It requires only 1 rack unit of vertical space and is secured with four screws.

4Menu Tree

1)TV

Input

Volume

Color Change

Channel ADD/REM

System Setting

Television

Volume Adjust

Brightness

Contrast

Hue

Color

-

+

Save Yes

Save Yes

2Computer

1)Computer Mode Selection

Present	Increment
Channel No	ADD/Remove
Value Default
		CABLE
TV = Air CH
		AIR

Press Menu Select (INPUT) using the UP, DOWN keys press Select (MONITOR) and than press select.

2) Horizontal Pan / Vertical Pan Control

Press Menu Select (HORIZONTAL PAN ) or (VERTICAL PAN) control (HORIZONTAL PAN) or (VERTICAL PAN) by pressing the UP, DOWN keys.

3) Value Default

Press Menu Select (SYSTEM SETTING) press Select (VALUE DEFAULT) press Select (System control values will be initialized as this monitor is manufactured).

4) Color Change

Press Menu Select (COLOR CHANGE) Select one of 4 modes to set you can control selected sub-menu with the UP, DOWN keys press Select sub-menu (4 color mode) will appear repeat the above steps until you have settled color change press Menu when you press menu, you will be asked whether (SAVE YES) or (SAVE NO) Select one of the two options.

Color Change sub-menu will be limited to Brightness/Contrast only.

(If you press menu before selecting (SAVE YES), color will become invalid.)

5) Input Condition Control

Press Menu Select (SYSTEM SETTING) Select (INPUT CONDITION) Select one of the five modes to set. Control the selected sub-menu with Select key. After tuning is settled, use Menu key to escape from menu tree.

2) PC Monitor

Input

Color Change

System Setting

Monitor

Brightness

Contrast

Horisontal Pan

Vertical Pan

Value Default

Input Condition

-+

Save Yes

Save No

H/V SYNC POLA

IN CLK EDGE U/D

OUT CLK U/D

ADC CLK PHASE

PIXEL FREQUENCY

	Marshall Electronics
V-RD151PUsers Guide