ASX
Ultra-High Performance Active Subwoofer
features
✷
✷Hybrid® large folded horn and ported design,
✷Single 21" (530mm)/6" (150mm) voice coil driver with 2.4" (60mm)
✷
✷Dedicated Class D amplifier with 8.5kW peak power
✷Switched mode power supply with PFC (Power Factor Correction) and global mains voltage operation
✷DSP on board providing delay, EQ and filtering as well as amplifier and driver excursion limiting
✷PC based software application for parameter configuration
applications
✷Premium club installations
✷Stadium installations
✷Theme park special effects
Hybrid® horn
Martin Audio’s trademark Hybrid® horn design marries the very high efficiency of a large folded horn with the low frequency extension of a bass reflex enclosure. With a path length of 2.13 metres (7ft), the horn dominates the output down to 40Hz. Below this frequency the reflex ports take over, extending output to
The chamber housing the 21" (530mm) transducer is ported to the front of the enclosure, with special attention given to the
pressure at the port entry and exit and reduce the air velocity at the inner and outer port edges to reduce air noise. The port profile also minimises the acoustic resistance to maximise the output from the ports.
Extensive bracing is employed throughout the 18mm birch- ply enclosure and aluminium
commercial installation: ASX © Martin Audio Ltd.