AC Power Connection | Replacing the Fuse |
The power cord should be firmly inserted into any conve- nient AC wall outlet. The CW10 also integrates a signal sensing power supply that automatically switches off after sensing no music signal for several minutes (this will cause the status LED to turn off).
Your CW10 subwoofer is wired for the power service sup- plied in the country of original consumer sale. The AC power rating applicable to a particular unit is specified both on the packing carton and on the serial number plate attached to the subwoofer.
If you remove your CW10 subwoofer from the country of original sale, be certain that AC power supplied in any sub- sequent location is suitable before connecting and operating the subwoofer. Substantially impaired performance or severe damage may occur to the CW10 subwoofer if operation is attempted from an incorrect AC power source.
If the fuse in your CW10 should require changing, turn off and unplug your CW10 before removing the fuse. Replace the bad fuse with a matching T 1.6A L 250V (T 0.8A L 250V if you are in a region using 230V).
Break-In
Our custom made woofers require approximately 50 hours of
8Connections and Control Settings