Marvel Industries 6SWCE A P P L I A N C E F E At U R E S, Insert Wine Bottles, Roll-outRacks

A P P L I A N C E F E AT U R E S

Insert Wine Bottles

The six roll-out shelves each hold eight bottles. See figure 4 for typical wine bottle spacing. Tall bottles should not be loaded on the bottom rack because they may prevent the door from closing.

Loading Tips and Suggestions

Bottom rack(s) may be removed for storing “jug” wines. You may store magnums and other large bottles on any of the racks (except for the top rack) by removing the rack directly above them. Position white wines on the middle or lower racks and red wines on the upper racks. (See figure 5)

The bottles on the top rack directly under the light will be exposed to a slightly higher temperature when the light is on. Position your wines accordingly and REMEMBER TO TURN OFF THE LIGHT WHEN IT IS NO LONGER NEEDED.

Keep wines that you plan to use for everyday drinking and entertaining on the front half of the racks where labels are completely visible. Place wines for aging or longer term storing in rear.

Roll-out Racks

The six-roll out wine racks may be pulled out approximately 14 inches to facilitate adding or removing bottles. Do not lean on or press down heavily on the wine shelves. Doing so may damage the shelves and the wine bottles stored on them. Pull the wine racks out gently and carefully to minimize unsettling your wine collection. Avoid pulling out more than one rack at any time to maintain stability.

Single Bottle Racks

Because bottles are not stacked on top of each other, you can easily view and access your inventory without disturbing other bottles. (See figure 6)

Front Bottles (Necks Facing Rear) Rear Bottles (Necks Facing Front)

figure 4

figure 5

figure 6

5