Marvel Industries 80RD I N S Ta L L At I O N, Ideal Ambient Temperature Range, Select Location

I N S TA L L AT I O N

Select Location

The proper location will ensure peak perform- ance of your drawer refrigerator. Choose a loca- tion away from heat and out of direct sunlight. Best performance will be maintained when installed within the following parameters:

Ideal Ambient Temperature Range*

built-in55-80°F

freestanding55-90°F

* Drawer Refrigerator will not perform correctly in ambient temperatures less than 55°F.

Cabinet Clearance

Ventilation is required for the bottom front section of the unit where the grille is located. Keep this area open and clear of any obstructions. Adjacent cabi- nets and countertop can be installed on top, back and sides of the unit as long as grille and drawer access remain unobstructed. An opening of 30” is required between cabinets with a depth of 24”.

Adjacent cabinets and countertop can be installed on top, back and sides of the unit as long as the grille and drawer access remain unobstructed. Ventilation is required for the bottom front section of the unit where the grille is located. Keep this area open and clear of any obstructions.

Make certain that the leveling legs supplied with the drawer refrigerator are installed according to the instructions. Leveling adjustments can be made by raising or lowering the glides on the bot- tom of the unit.

DISCONNECT POWER SOURCE BEFORE

ADJUSTING LEVELING LEGS

Important Safety Issue

A cabinet “anti-tip” device is mounted to the back of your drawer refrigerator. If your installation is a built-in undercounter application, you do not need to apply this feature.If your installation is a free- standing application with no counter top directly above the top of the drawer refrigerator, you must apply this feature to prevent the unit from tipping forward when the drawers are pulled out. The “anti-tip” device is attached at the back of each cabinet. Please see installation instructions sup- plied with the “anti-tip” device.

Electrical Connection

Check the serial nameplate for the correct power supply. Use only the electrical power supply spec- ified on the serial nameplate. Do not use an exten- sion cord.

25.82

29.88 23.88 21.81

15.13

34.00

15.13

3.50

Grounding Method

This drawer refrigerator is equipped with a power supply cord with ground. It must be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. It is the customer’s responsibility to provide the proper grounding type receptacle. Do not alter the plug in any way.

THIS UNIT SHOULD NOT, UNDER ANY

CIRCUMSTANCES, BE UNGROUNDED.

3