INSTALLING YOUR REFRIGERATED DRAWERS

Select Location

The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources. Best perfor- mance will be maintained when installed within the follow- ing parameters:

Ideal Ambient Temperature Range

Built-In

55-80 °F

 

 

Free-Standing

55-90 °F

 

 

Cabinet Clearance

Ventilation is required from the bottom front section of the unit. Keep this area open and clear of any obstructions. Adjacent cabinets and countertop can be installed on top, back and sides of the unit as long as the grille and door access remain unobstructed.

Leveling Legs

Adjustable legs at the front corners of the unit should be set so the unit is firmly positioned on the floor and the front is raised just enough so that the door closes easily when opened about halfway.

Turn leveling legs clockwise to raise unit, counterclockwise to lower it.

“Anti-Tip” Device

A cabinet “anti-tip” device is mounted to the back of your refrigerated drawers. If your installation is a built-in under- counter application, you do not need to apply this feature. If your installation is a free-standing application with no countertop directly above the top of the unit, you must apply this feature to prevent the unit from tipping forward when the drawers are pulled out. The “anti-tip” device is attached to the back of the cabinet. Please see installation instructions supplied with the “anti-tip” device.

Electrical Connection

Use nominal 115 VAC, 60 Hz only. DO NOT USE AN EXTENSION CORD.

Grounding Method

This product is factory equipped with a power supply cord that has a three-pronged, grounded plug. It must be plugged into a mating grounding type receptacle in accor- dance with the National Electrical Code and applicable lo- cal codes and ordinances (see Figure 1). If the circuit does not have a grounding type receptacle, it is the responsibility and obligation of the customer to exchange the existing receptacle in accordance with the National Electrical Code and applicable local codes and ordinances. The third ground prong should not, under any circumstances, be cut or removed (see Figure 2). All U.L. listed refrigerated prod- ucts are equipped with this type of plug.

Figure 1

2

Page 2 Page 4
Page 3
Image 3
Marvel Industries 60RDE, 80RDE manual Installing Your Refrigerated Drawers, Ideal Ambient Temperature Range
Page 2 Page 4

60RDE, 80RDE specifications

Marvel Industries has made a significant mark in the realm of advanced manufacturing technologies with its standout products, the 80RDE and 60RDE series. Designed for precision and efficiency, these machines have redefined the standards in the industry.

The 80RDE model represents the pinnacle of automation in manufacturing. It boasts a robust yet compact design that allows it to function in various workspaces, making it an ideal choice for both small workshops and large factories. One of its most notable features is the high-speed spindle that can reach up to 20,000 RPM, enabling it to handle a diverse range of materials from soft plastics to hard metals. The spindle’s power combined with advanced cooling technology minimizes thermal expansion, yielding consistent precision even during prolonged operations.

Equipped with an intuitive user interface, the 80RDE allows operators to easily program and monitor tasks. Its compatibility with Industry 4.0 standards enables seamless integration into smart manufacturing ecosystems. This machine also features an automatic tool changer (ATC) that supports multiple tooling options, enhancing productivity and allowing for quick changeovers without manual intervention.

On the other hand, the 60RDE model is tailored for operations requiring a balance between performance and cost-effectiveness. It retains many of the innovative features of the 80RDE but simplifies certain aspects to cater to a broader range of users. Its maximum spindle speed is slightly lower at 15,000 RPM, yet it still offers impressive torque and efficiency. The 60RDE focuses on reliability, making it a favorite among businesses in high-demand manufacturing sectors that prioritize uptime and productivity.

Both models utilize cutting-edge servo motor technology that ensures precise positioning and repeatability. Moreover, they come equipped with advanced safety systems, including emergency stop buttons, light curtains, and overload protection, ensuring a safe working environment for operators.

In addition to their impressive technical specifications, both the 80RDE and 60RDE series are designed with sustainability in mind. They are energy-efficient solutions that help companies reduce their carbon footprint while maintaining high production levels.

In summary, the Marvel Industries 80RDE and 60RDE models illustrate the forward-thinking and technological prowess of the company. Their advanced features, versatility, and commitment to safety and sustainability make them essential tools for modern manufacturing, catering to the evolving needs of the industry. By investing in these machines, businesses can enhance their operational efficiency and future-proof their manufacturing capabilities.
Top Page Image Contents