Schedule For Normal Care

Care Required

Schedule

Clean snow and ice from

After each use.

snowthrower.

 

Grease Auger Zerks **

Every 25 hours &

 

before seasonal storage

Grease Drive Chain **

Every 25 hours &

 

before seasonal storage

Grease Drive Shaft **

Every 10 hours &

 

before seasonal storage

Check Auger Gear

Every 25 hours

Gear Box Oil***

 

Lube Chute & Blower ***

Every 25 hours &

 

before seasonal storage

 

 

*Use 30 Weight Engine Oil

**Use Automotive Lithium Grease

***Use Simplicity Winter Weight Worm Gear Oil

Lubricate Snowthrower

Maintenance

WARNING

To avoid serious injury, perform maintenance on the tractor or snowthrower only when the engine is stopped, parking brake is set and all moving parts have stopped. Always remove the ignition key before beginning maintenance or adjustments to prevent accidental starting of the engine.

MAINTENANCE

In general, linkage connections and other parts that have partial rotational or sliding movement should be lubricat- ed periodically with SAE 30 weight oil. Avoid applying excessive amounts of oil or grease since this may cause a build-up of dirt around the lubricated area, making sub- sequent lubrication more difficult to accomplish.

Figure 2. Lubricate Snowthrower

9

Page 11
Image 11
Massey Ferguson L&G 1694404 manual Maintenance, Schedule For Normal Care, Lubricate Snowthrower