Master Appliance Heat Blower Description & Introduction, Specifications, Model Volts Amps

Description & Introduction

The Masterflow® Heat Blower is a heavy-duty, industrial- quality heat blower suitable for continuous duty applications. It produces a high volume of hot air for demanding indus- trial applications. The adjustable stand features a keyhole slot for easy equip- ment mounting and allows the nozzle capability of rotating 90° (horizontal to vertical).

Your Masterflow® is equipped with a thermal fuse which will protect the element from over- heating or burn out due to

a nozzle blockage or motor failure.

Heat blowers are a source of extremely high tempera- ture flameless heat (up to 750°/400°C). As with other products which generate

extremely high tempera- tures, regardless of your specific application, extreme care and caution should be observed when using this product. Therefore, we recommend that you pay particular attention to the safety instructions which we have provided for your protection.

Specifications

	*Temperature
Model	°F	°C	Volts	Amps
AH-301	300	50	120	10.0
AH-302	300	150	220/240	5.2
AH-501	500	260	120	14.0
AH-502	500	260	220/240	7.3
AH-751	750	400	120	18.0
AH-752	750	400	220/240	9.4

*Average temperature measures 1" from nozzle.

Important Safety Instructions

WARNING: THIS PRODUCT IS A SOURCE OF VERY HIGH TEMPERATURE FLAMELESS HEAT. AS WITH ANY ELECTRICAL TOOL, WHEN USING HEAT TOOLS, ALWAYS FOLLOW BASIC SAFETY PRECAU- TIONS, INCLUDING THE FOLLOWING, TO REDUCE THE RISK OF FIRE, ELEC- TRIC SHOCK OR PER- SONAL INJURY.

1)Read and understand this instruction manual before using. Save this manual for future reference.

WARNING: To reduce the risk of fire or electric shock,

do not expose heat blow- ers to rain or moisture. Store indoors. Connect to grounded outlet only.

2)Do not use plug adaptors or remove the ground prong from the plug. This tool is equipped with a 3-prong plug and a 3-wire grounding system. Connect to prop- erly grounded outlets only.

3)Use heat blower only on adequately rated circuits to avoid overheating of electrical systems.

4)Masterflow Heat Blowers can produce up to 750°F/400°C of flameless

heat out of the nozzle. Do not direct this hot air stream at your clothing, hands or body parts. Do not use as a hair dryer.

5)Do not touch nozzle open- ing or nozzle shield until cool. When in “Hot” mode, extreme heat is generated at those areas. Always hold tool by the handle or use permanently attached stand.

6)Run on “Cold” before turn- ing off. The nozzle and shield require approxi- mately 3 minutes to become cool to the touch.

2