2.Remove or cover any car- pets, rugs, furniture, cloth- ing, cooking utensils and air ducts.
3.Place drop clothes in the work area to catch any paint chips or peelings. Wear protective clothing such as extra work shirts, overalls and hats.
4.Work in one room at a time. Furnishing should be removed or placed in the center of the room and covered. Work areas should be sealed off from the rest of the dwelling by sealing doorways with drop clothes.
5.Children, pregnant or potentially pregnant women and nursing moth- ers should not be present in the work area until the work is done and all cleanup is complete.
6.Wear a dust respirator or a dual filter (dust and fume) respirator mask which has been approved by the Occupational Safety and
Health Administration (OSHA), the National Institute of Safety and Health (NIOSH), or the United Stated Bureau of Mines. These masks and replaceable filters are readily available at major hardware stores. Be sure the mask fits. Beards and facial hair may keep masks from sealing properly. Change filters often.
DISPOSABLE PAPER MASKS ARE NOT ADEQUATE.
7.Use caution when operat- ing the hot air gun. Keep the hot air gun moving as excessive heat will gener- ate fumes which can be inhaled by the operator.
8.Keep food and drink out of the work area. Wash hands, arms and face and rinse mouth before eating of drinking. Do not smoke or chew gum or tobacco in the work area.
9.Clean up all removed paint and dust by wet mopping the floors. Use a wet cloth
to clean all walls, sills and any other surface where paint or dust is clinging.
DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate deter- gent or trisodium phos- phate (TSP) to, wash and mop areas.
10.At the end of each work session put the paint chips and the debris in a double plastic bag, close it with tape or twist ties, and dispose of properly.
11.Remove protective cloth- ing and work shoes in the work area to avoid carry- ing dust into the rest of the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed with the work clothes. Wash hair and body thoroughly with soap and water.
SAVE THESE INSTRUCTIONS
Send Product to:
Master Appliance Corp. Attn: Repair Department 2420 - 18th Street Racine, Wl 53403
Operating Instructions
Your Masterflow® is a heavy- duty industrial quality heat blower. You can do more heat- ing jobs faster with this heat blower because of its high power and air flow ratings.
This product provides a fast flow of heated air for applica- tions such as:
•Shrinking
•Shrinking sleeves over wires, harnesses and bottle caps.
•Drying inks and paints on silk screen, posters, fabrics and papers.
Uses are as limitless as your own ingenuity.
The proper amount of heat for each application is dependent upon the model number of the Masterflow in use, the dis- tance from the work surface, and the heat application time.
Before performing any appli- cation, we recommend that
you experiment with a piece of scrap material. Use care in approaching the work until you find the proper combina- tion of distance from the work surface, and the heat applica- tion time.
Use a gentle back and forth motion when applying heat unless it is found that a con- centrated heat is desired.
4
