UT-100 Ignition Instructions for use as a Butane Torch

7

8

 

 

1.Remove protective cap. (Do not twist off). Remove the soldering or heat tip by turning the knurled nut and tip housing to the right (figure 1) Retighten knurled nut (Do not over tighten) Never change tips while hot.

2.Push shutter lever to backward position.

3.Position the gas control lever to 3 and move on/off lever to “ON”. And ignite at flame orifice In cold conditions move gas lever higher, in warm, lower. (figure 7)

4.Adjust the flame length by using the gas control lever. NOTE: “Flame out” could occur if the temperature control lever is positioned at too high a setting.

5.Preheat flame is obtainable by moving the shutter lever half-way up, so that the shutter covers the small holes in the ejector. (However, normal operating position for the shutter lever is completely down.)

6.Extinguish by turning the gas “ON/OFF” lever to “OFF” until it clicks (figure 8).

If a large flame is required replace the soldering heat ejector with the torch ejector.

9

 

10

1.Push shutter lever upward to expose the small holes on the solder/heat ejector. Insert the accessory spanner wrench into one of the small holes and turn to the right until loose. Continue to turn with fingers until the ejector is easily removed (Figures 9 and 10)

2.Mount the torch ejector in place of the removed ejector. Push the torch ejector downward and then turn until finger tight. Tighten completely with accessory spanner wrench.

NOTE: The original soldering ejector must be reinstalled

before using as soldering or heat tool.

6

Page 6
Image 6
Master Appliance UT-200 UT-100 Ignition Instructions for use as a Butane Torch, Before using as soldering or heat tool

UT-200, UT-100 specifications

The Master Appliance UT-100 and UT-200 are high-performance heat guns designed for professionals and hobbyists alike. These tools are recognized for their versatility, durability, and advanced features, making them ideal for various applications, from soldering and shrink tubing to removing paint and thawing frozen pipes.

One of the key features of both the UT-100 and UT-200 is their adjustable temperature control. Users can easily regulate the heat output to suit specific tasks, ensuring optimal temperature for materials without the risk of damage. The UT-100 offers a temperature range of 200°F to 1000°F, while the UT-200 enhances this capability with a broader range of 200°F to 1200°F, allowing for more intricate and high-heat applications.

In terms of design, the heat guns are lightweight and ergonomic, making them comfortable to use for extended periods. They come equipped with a safety guard to prevent accidental contact with the hot nozzle. The integrated stand allows the tools to be set down safely while in use, providing added convenience and reducing user fatigue.

Both models utilize advanced heating element technology to deliver rapid heat-up times, ensuring that you spend less time waiting and more time working. The durable construction of Master Appliance tools ensures longevity and reliability, even in demanding work environments.

The UT-200 takes it a step further with a variable airflow feature, allowing users to emit air at different speeds without the need for additional attachments. This flexibility increases the adaptability of the tool for various tasks, such as delicate work on electronic components or heavy-duty applications needing high air movement.

Moreover, these heat guns are equipped with replaceable nozzles and accessories, enhancing their functionality. Users can choose from a variety of nozzle configurations, depending on the task at hand, such as concentrated beams for soldering or wide nozzles for heat shrinking.

Both models also prioritize user safety, featuring built-in thermal protection that prevents overheating, safeguarding both the tool and the user. The Master Appliance UT-100 and UT-200 represent a significant investment for those looking for high-quality, versatile heat guns that meet the demands of any project. Their blend of performance, durability, and user-friendly design makes them essential tools for professionals in various industries.