Master Bilt QMVM-48L Technical Specifications, Listings, Hookup, Recommended Operating Conditions

QMVM-L SERIES

QUANTUM SERIES MEDIUM TEMP LOW PROFILE

OPEN DISPLAY MERCHANDISERS

TECHNICAL SPECIFICATIONS

DIMENSIONS

DIMENSIONS

STANDARD

(in.)

(mm)

SHELF

CAP.

SHIP

SHIP

UNIT

NO. OF

SIZE

CU.

CU.

WT.

MODEL

L

D

H

L

D

H

VOLTS

AMPS

H.P.

SHELVES

(in inches)

FT.

FT.

LB/KG

QMVM-36L

36

30

60

914

762

1524

115

14.8

1/2

2

14 x 311/8

11.2

67.0

490/223

QMVM-48L

48

30

60

1219

762

1524

115

14.9

3/4

2

14 x 431/8

15.4

81.0

580/264

PLAN VIEW

LISTINGS

SIDE VIEWELEVATION VIEW

HOOKUP

Electrical hookup: 115v

NEMA 5-20P

Plumbing hookup: Requires connection to customer’s drain

RECOMMENDED OPERATING CONDITIONS

•Merchandisers designed to hold product in the 34° to 41°F (1° to 5°C) range

•Designed to operate in air-conditioned stores where the maximum temperature is 75°F and the maximum relative humidity is 55%

•Should not be installed in direct sunlight

•Should not be installed near HVAC vents, fans or doorways that will disrupt airflow and compromise the function of the air screen inside the case

•Bottom shelf should not be loaded such that the front air intake is obstructed

•Floor drain should be properly trapped

•Factory installed controls should not be altered, removed or replaced without consent of the factory

•Product must not be displayed in the cold air curtain

BID SPECIFICATIONS

Item no. QMVM-_______L			eter or other temperature indicator.	rear air discharge and use R-134a refriger-
Provide__________(	) Quantum Series		Merchandiser to have two-position	ant. The temperature range is 34° to 41°F (1°
Medium Temp Low Profile Open Display			shelves adjustable in 1" increments, perfo-	to 5°C). Merchandiser to have standard lim-
Merchandiser(s), Master-Bilt model no.			rated interior back wall, independent shelf	ited 4 year extended compressor warranty
QMVM-_______L.			lighting and price tag molding. Merchan-	and 1 year limited parts and labor warranty.
Merchandiser to have standard electronic			diser will also contain 2" foamed-in-place	It is also to be UL and C-UL listed and UL
controller eliminating the need for a room			“zero ODP” urethane insulation.	EPH classified.
thermostat, defrost termination/fan delay			The refrigeration system is to be self-con-
control, defrost timer and digital thermom-			tained, with front condenser air intake and
		908 Highway 15 North • New Albany, MS 38652
		PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
		All specifications subject to change without notice.		1082-4/06-aq
			©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.