TOUCHPAD MENU MODE

CHANGE KEYPAD

 

BEEP VOLUME

Y/N

CHANGE VOICE

VOLUME Y/N

ACTIVATE

 

SIREN TEST

Y/N

DISPLAY

 

FIRE ALARM

Y/N

DISPLAY

FIRE TROUBLE Y/N

continue to chime when system is armed.

CHANGE KEYPAD BEEP VOLUME - When the Touchpad buttons are pressed or when an entry warning activates, the Touchpad beeper sounds. This function allows the Touchpad beeper volume to be adjusted. Press YES to increase, press NO to decrease. Selections are HIGH, MED-HIGH, MED, LOW and OFF.

CHANGE VOICE VOLUME - All Touchpad functions are displayed in the LCD window and are accompanied by a voice prompt. This function allows the Touchpad voice prompt volume to be adjusted. Press YES to increase, press NO to decrease. Selections are HIGH, MED-HIGH, MED, LOW and OFF.

ACTIVATE SIREN TEST - Activates the alarm (while disarmed) for about 2 seconds and performs a battery test. If the alarm does not sound, call for service. Note: If the battery is low, a “LOW BATTERY E02-00 SERVICE” will appear in the display indicating a low battery condition. First allow 24 hours for the battery to recharge. If the trouble continues, call for service.

DISPLAY FIRE ALARM - Displays alarms that have occurred on the Fire Zone(s). Press the YES and NO buttons to scroll zones. Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

DISPLAY FIRE TROUBLE - Displays trouble conditions that have been detected on the Fire Zone(s). Press the YES and NO buttons to scroll zones. Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

18