TOUCHPAD MENU MODE

ACTIVATE

 

FAULT FIND

Y/N

 

 

 

 

RESET

 

SYSTEM TBL

Y/N

 

 

ACTIVATE

DIALER TEST Y/N

ENTER LOG

MENUY/N

ACTIVATE

PROGRAM Y/N

ACTIVATE FAULT FIND - Activates a multiple diagnostic test report. For installer's use only. If accidentally enabled, press RESET to exit. Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

RESET SYSTEM TBL - System troubles display and sound at the Touchpad. Correcting the trouble will clear most indications, however the following error codes will require manual reset: E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for a description of error codes). Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

ACTIVATE DIALER TEST – Allows a central station communication test to be initiated, transmitting a Test Timer signal. For installer's use only. If accidentally enabled, press RESET to exit. Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

ENTER LOG MENU – The Log Menu provides a list of logged events. DISPLAY ALARM LOG displays the most recent alarm events. DISPLAY TOTAL LOG displays the most recent events of all types. DISPLAY FIRE LOG displays the most recent fire events. DISPLAY OP/CL LOG displays the most recent openings and closings and DISPLAY SYSTEM LOG displays the most recent system events. Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

ACTIVATE PROGRAM - Activates the User Program Mode. See page 21 for more infor- mation. Note: This feature is disabled while armed. Note: This selection only appears with a Master I-FOB inserted in the Touchpad.

19