R

PORTABLE GASOLINE GENERATORS

OPERATION

Continued

POWER CORD AND PLUG REQUIREMENTS

120V, 30-amp twist-lock receptacle

•NEMA L5-30P plug

•Three-wire, 30-amp cord

120/240V, 20 or 30-amp twist-lock receptacle

•NEMA L14-20P (20-amp) or L14-30P (30-amp) plug

•Four-wire, 20-amp or 30-amp cord

120/240V, 50-amp receptacle

•NEMA L14-50P

•Four-wire, 50-amp cord

MGH8500AIE Only

PRESTART

Operate generator on a firm, dry, and clean surface. The surface must be level. Protect generator from heavy dust, sand, dirt, rain, or snow. Do not locate generator near standing water and snow. Make sure area is well-vented.

WARNING: Only responsible adults should use generator. Never let anyone operate genera- tor without proper instructions.

Note: If oil level is too low, oil alert system will keep engine from starting (see Oil Alert System, page 5). Make sure oil level is full before starting. See Engine Oil, page 7.

Before starting the engine, disconnect all electric loads from generator.

STARTING

IMPORTANT: The engine speed is preset. The throttle is locked in preset position. Do not adjust throttle. Preset position lets engine run at 3600 RPM under load. The engine must maintain 3600 RPM for generator to create correct voltage. Running engine at lower speeds will damage generator and powered items.

IMPORTANT: Never start generator with electrical loads connected. Start engine before adding electrical loads.

1.Make sure gasoline tank is full. See Fuel, page 7 for fuel information.

2.Pull choke button out (see Figure 17). This closes the choke.

Note:You may not need to close choke if engine is warm or air temperature is high.

3.Start the engine.

Turn the engine switch to the START position (see Figure 18). Hold it there until engine starts. When engine starts, let switch return to the ON position.

IMPORTANT: Do not use electric starter more than five seconds. Starter motor damage may occur. If engine fails to start, release the switch and wait ten seconds. After ten seconds, try starting again.

Note: If engine does not start, check the oil in the crankcase. Add oil as necessary. Be sure engine is on a level surface. See Oil Alert System, page 5.

4.As engine warms up, the choke will automatically open.

Choke Button Pulled Out (Closed Position)

Figure 17 - Choke Button Closed

HONDA

Engine

Switch

ON

OFF START

 

ENGINE SW

Figure 18 - Engine Switch

MGH10000C Only

Figure 16 - Cord and Plug Configurations

12

117846

Page 11 Page 13
Page 12
Image 12
Master Lock MGH10000C, MGH8500AIE installation manual Power Cord and Plug Requirements, Prestart, Starting
Page 11 Page 13

MGH8500AIE, MGH10000C specifications

The Master Lock MGH10000C and MGH8500AIE are two of the most advanced padlocks offered by Master Lock, a company renowned for its commitment to security and innovation. Both models feature cutting-edge technologies designed to enhance security while providing user-friendly functionalities.

The MGH10000C is particularly notable for its Bluetooth connectivity, allowing users to manage access via a smartphone application. This feature makes it easy to lock or unlock the padlock without the need for traditional keys or combinations. The app also enables users to grant temporary access to others, making it ideal for shared spaces like gyms, offices, or home environments. The padlock's robust construction includes a durable zinc body and a hardened steel shackle, ensuring resistance against cutting and prying.

In contrast, the MGH8500AIE offers an integrated fingerprint scanner that can store up to 10 different fingerprints. This biometric feature makes it a convenient choice for users who prefer quick access. The MGH8500AIE’s compact design and weather-resistant construction make it suitable for both indoor and outdoor use, providing reliability in various environments. The one-touch access feature allows users to unlock the padlock with just a finger, making it efficient for daily use.

Both models are designed with user security in mind. The MGH10000C includes a tamper alert system that sends notifications if unauthorized access attempts are made, providing peace of mind. On the other hand, the MGH8500AIE is equipped with a low-battery indicator that reminds users to replace the batteries before they run out, preventing lockouts.

In terms of power supply, the MGH10000C operates on a rechargeable battery, which can last for several months on a single charge, while the MGH8500AIE uses replaceable batteries designed for long-life performance.

Overall, whether choosing the smartphone-enabled Master Lock MGH10000C or the biometric MGH8500AIE, users benefit from advanced security features, exceptional durability, and convenient access methods. These padlocks stand as prime examples of how technology can enhance everyday security solutions, making them a worthy investment for anyone seeking reliable protection for their belongings.
Top Page Image Contents