Matsushita CF-18JHU80TW service manual Removing the LCD Hinge, TS PS2 PCB, Lcd

7.13.Removing Antenna Cover, Tablet Latch Cover and LCD Rear Case

<X>

7.15. Removing Inverter PCB

Inverter Case

Connector (CN2)

<X>

<X><X> <X>

Antenna Cover<V>

<V>

<V>

<V>

<V> <V>

<V>

<V> <V> <V>

<W> LCD Rear Case <W>

<X>

<X>

<X><X> <X> <X>

<V>

<V> <V>

	Inverter PCB
<Z>	Connector (CN1)
	Connector (CN901)
	TS PS2 PCB
	Connector (CN900)
	LCD Back Damper
	<Z>

Figure 21

<V>	<V> Antenna Cover
<V>
Tablet Latch Cover

Figure 19

1.Remove the sixteen Screws. <V>

2.Remove Antenna Cover and Tablet Latch Cover.

3.Remove the two Screws. <W>

4.Remove the eleven Screws. <X>

5.Remove the LCD Rear Case. Screw<V>: DRQT26+D5FKL <W>: DXYN3+J10FNL

<X>: DXYN2+J6FNL

1.Disconnect the two Cables from two Connectors (CN1, CN2).

2.Remove the Inverter Case and Inverter PCB.

3.Remove the two Screws. <Z>

4.Remove the LCD Rear Damper. Screw<Z>: DXHM0042ZA

7.16.Removing GPRS Antenna PCB, LAN1-BT PCB, LAN2-BT PCB and Pen Holder

Pen <d>

7.14. Removing the LCD Hinge

Cable￿	<Y>
Holder￿		<Y>	Cable￿
Plate
			Holder￿
LCD￿			Plate
Hinge			Cable￿
			Holder
Cable Holder￿			LCD Cable
			Holder￿
Plate￿			Sheet
￿

Cable￿

LAN1-BT￿ Antenna PCB<b>

<b>

<d> Pen Holder

<c>

<c> LAN2-BT￿ Antenna PCB

<a> GPRS ￿

Holder￿

￿

Figure 20

1.Remove the two Screws. <Y>

2.Remove the Cable Holder Plate and LCD Hinge.

3.Remove the Cable Holder.

4.Remove the Cable Holder sheet. Screw<Y>: DXYN3+J8FNL

<a> Antenna PCB

Figure 22

1.Remove the two Screws. <a>

2.Remove the GPRS Antenna PCB.

3.Remove the two Screws. <b>

4.Remove the LAN1-BT Antenna PCB.

5.Remove the two Screws. <c>

6.Remove the LAN2 Antenna PCB.

7.Remove the Pen.

8.Remove the two Screws. <d>

9.Remove the Pen Holder. Screw<a><b><c>: DFHE5025XA

<d>: DRHM5025YA

7-5