STORAGE

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

CAUTION: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

•Clean entire tiller (See “CLEANING”in the Maintenance section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Maintenance section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUEL SYSTEM

IMPORTANT:IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTUREWHICH LEADSTO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent.

NOTE: Fuel stablizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stablizer container. Run engine at least 10 minutes after adding stablizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

•Remove spark plug.

•Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder.

•Pull starter handle slowly several times to distribute oil.

•Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to give protection from dust and dirt.

•Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER TILLER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

19

Page 18 Page 20
Page 19
Image 19
Maxim MXR500 owner manual Storage, Other, Fuel System, Engine OIL, Cylinders
Page 18 Page 20

MXR500 specifications

The Maxim MXR500 is a cutting-edge multi-channel audio mixer designed for professional sound engineers and musicians. Renowned for its robust construction and versatile features, the MXR500 is tailored for both studio recording and live performance settings. This mixer combines advanced technology with user-friendly controls, making it an ideal choice for a wide range of audio applications.

One of the standout features of the MXR500 is its exceptional sound quality. The mixer is equipped with high-performance preamps that ensure crystal-clear audio recording and playback. Each channel boasts a 3-band EQ, allowing users to finely tune the tonal characteristics of individual audio sources. This capability is particularly beneficial in live settings, where adjusting sound on the fly is crucial.

The MXR500 supports up to 16 input channels, facilitating the mixing of multiple audio signals simultaneously. Each channel offers independent gain control, allowing users to balance levels accurately. The mixer also features built-in digital effects, including reverb and delay, enhancing the audio experience without the need for additional equipment.

In terms of connectivity, the MXR500 comes with a range of input and output options, including XLR and TRS connectors. This versatility enables seamless integration with microphones, instruments, and other audio gear. Additionally, the mixer supports USB connectivity, making it easy to connect to computers for digital recording or live streaming.

The mixer’s interface is designed with ease of use in mind. Intuitive faders and knobs are clearly labeled, allowing sound engineers to make quick adjustments during performances. The bright LED meters provide visual feedback on audio levels, ensuring optimal mixing in various lighting conditions.

Durability is another hallmark of the Maxim MXR500. Constructed with high-quality materials, this mixer is built to withstand the rigors of both studio and on-the-road use. The compact design also makes it portable, ideal for musicians who need to transport their equipment frequently.

In conclusion, the Maxim MXR500 is a powerful and versatile audio mixer that meets the demands of professionals across different sectors. With its advanced features, exceptional sound quality, and durable construction, the MXR500 stands out as a reliable choice for any sound engineer or musician looking to elevate their audio production experience. Whether in the studio or on stage, the MXR500 delivers performance and quality that audio professionals can depend on.
Top Page Image Contents