OPERATING INSTRUCTIONS
1) Remove the battery compartment door by
pulling the door tab towards you. Install two
fresh AA batteries, noting the polarity diagram
embossed in the battery compartment. For
continuous, heavy-duty use, alkaline batteries
are recommended.
NOTE: Rechargeable ni-cad batteries can be used
in the 49-SX. To recharge them while installed in
the unit, Maxon’s DV-7510 optional AC/DC wall
charger must be used. Average charging time is
12-16 hours.
CAUTION: Do not attempt to recharge alkaline
or carbon zinc batteries - this could result in an
explosion, or other damage to the unit.
2) Using the belt clip, affix the unit to your belt
or another convenient location. Put the headset
on, extend the antenna and adjust to a comfort-
able fit. Keep the microphone element within 1"
of your mouth.
7