Delta Electronics VFD-VL manual Reset, EEE Fault code 5 E, Eeef a u l t code 6 3 E

Chapter 6 Fault Code Information and Maintenance

Display	Description
	illegal communication address

PCESl a v e EF a u l t EE
FEEE F a u l t C o d e : 5 E7	Corrective Actions:
	Check if the communication address is correct.
	Communication time-out

PCET i me EOu t u l t EE
FEEE F a u l t C o d e : 5 E8	Corrective Actions:
	Check if the wiring for the communication is correct.
	Keypad (KPVL-CC01) communication time-out
PUET i me EOu t u l t EE	Corrective Actions:
FEEEF a u l t Co d e : 5E9
	1.	Check if the wiring for the communication is correct

2.Check if there is any wrong with the keypad

Brake chopper fail

Br k Ch o Ep p e r FEEa i El		Corrective Actions:
F EEE F a u l t C o d e : 6 0E
		Press RESET key to correct it. If fault code is still displayed
		on the keypad, please return to the factory.
		Safety loop error
	Sa f e t y ERe l a y EEr r	Corrective Actions:
	FEEEF a u l t C o d e : 6 3E	1.	Check if the jumper JP18 is short circuit.

2.Re-power on to try it. If fault code is still displayed on the keypad, please return to the factory.

		Mechanical brake error
		Corrective Actions:
M	e c h e Br a k e u Fa i l E
		1.	Check if the mechanical brake signal is correct.
F	EEE F a u l t C o d e : 6 4E

2.Check if the detection time setting of mechanical brake (Pr.02-35) is correct.

		PG hardware error
	Gc H BEr r o r Fa i l E	Corrective Actions:
P		1.	Check if the wiring of PG feedback is correct.
F	EEE F a u l t C o d e : 6 5E	2.	If fault code is still displayed on the keypad with
			correct PG feedback, please return to the factory.

6.1.2 Reset

There are three methods to reset the AC motor drive after solving the fault:

STOP

1.Press RESET key on KPVL-CC01.

2.Set external terminal to “RESET” and then set to be ON.

3.Send “RESET” command by communication.

Revision Nov. 2008, VLE1, SW V1.03 6-9